Before using for the first time
6. Starting the calibration pro-
gramme
It is important to calibrate the washer-
dryer to ensure optimum water and
energy usage, as well as optimum
washing and drying results.
To do this, the Cottons programme
must be run without laundry.
No other programmes can be started
until calibration has been carried out.
The following message will then appear
in the display:
Open the stopcock and start the Cottons
90°C programme with an empty drum
Confirm with the OK sensor control.
The display will then change to the
standard menu for the Cottons pro-
gramme.
Washing
Temperature
90 °C
Cottons
TwinDos
Whites
1:57
h
Timer
Open the stopcock.
Touch the Start/Stop sensor control.
The washer-dryer calibration pro-
gramme will start. The duration will be
approximately 2 hours.
At the end of the programme, the fol-
lowing message will appear in the dis-
play:
Set up complete
28
Reach under the recessed grip and
pull the door open.
Tip: Leave the door slightly open to al-
low the drum to dry.
Switch the washer-dryer off with the
button.
11:02
Spin speed
1600
rpm
Extras
not selected
Save