SmartStart
The SmartStart function lets you
define a time period during which your
washer-dryer will start automatically.
The appliance will start on receipt of a
signal, e.g. from your energy supplier,
that indicates that the electricity tariff
is particularly economical.
This function is active when the
SmartGrid
setting is switched on.
The timeframe can be defined between
1 minute and 24 hours. During this
period, the washer-dryer waits for the
signal from the energy supplier. If no
signal is sent during the defined period,
the washer-dryer starts the programme.
Timer/SmartStart
Setting the time period
If you have activated
settings,
SmartStart by
will appear in the display instead of
by
and
Start at
Finish at
the
sensor control. See "Set-
Timer
tings" – "SmartGrid" for more informa-
tion.
The procedure for setting this is the
same as for setting the time for the
timer.
Set the time you want and confirm
with the OK sensor control.
Touch the Start/Stop sensor control
to start the wash programme with
SmartStart.
The selected programme will start auto-
matically, as soon as the energy sup-
plier has sent the signal, or the latest
calculated start time has been reached.
The procedure for changing or delet-
ing the SmartStart function is the
same as described in "Changing the
timer" and "Deleting the timer".
in the
SmartGrid
and
SmartFinish
when you touch
77