Changing The Programme Sequence; To Cancel A Programme; Interrupting A Programme; Changing A Programme - Miele WT 2780 WPM Operating Instructions Manual

Changing the programme sequence

To cancel a programme

You can cancel a programme at any
time after it has started.
^ Press the Start/Stop button and
select Cancel programme or turn the
programme selector to Stop.
... During washing:
The suds will be pumped away and the
washing programme is cancelled.
... During drying:
The garments will be cooled down
before the door can be opened.
If you want to remove the laundry:
^ Press the Door button.
If you want to select a different
programme:
^ Switch the machine off using the
K button.
^ Check that there is still detergent in
the detergent drawer. Add detergent
if necessary.
^ Switch the machine back on again
and select a new programme.
50

Interrupting a programme

^ Switch the machine off using the
K button.
To continue with the same programme:
^ Switch the machine back on again
with the K button.
,
Do not switch the washer-dryer
off before the end of a drying
programme. If this was done and the
laundry was then removed immedi-
ately it could give off a great amount
of heat.

Changing a programme

After the start of a programme, it is no
longer possible to select a different
programme.
You will need to cancel the current
programme before you can select a
new one.
Altering the temperature
You can alter the temperature of a
washing programme up to 5 minutes
after the programme has started.
^ Use the X and Y buttons to alter the
temperature.