Setting The Clock Format; Removing The Transit Bars - Miele WTR 860 WPM Operating Instructions Manual

Before using for the first time

3. Setting the clock format

The time of day can be displayed in 12-
hour or 24-hour clock format.
 Select the clock format you want and
confirm this with the OK sensor con-
trol.
The display will then bring up the
screen for setting the time of day.
Setting the time of day
This message only appears if the
washer-dryer has not yet been con-
nected to a WiFi network. The time of
day is set automatically when a con-
nection is established with a WiFi net-
work.
Time
 Place your finger on the number that
you want to change and move your
finger in the direction you want.
 Confirm with the OK sensor control.

4. Removing the transit bars


Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washer-dryer
and to adjacent cabinetry or appli-
ances.
Remove the transit bars as described
in "Installation".
24
14 02
13 01
12 00
11 59
10 58
The following message will then appear
in the display:

Remove transit bars and observe "Warn-
ing and Safety instructions" and "Before us-
ing for the first time" in the operating instruc-
tions
 Confirm that the transit bars have
been removed with the OK sensor
control.
The display will change to the next set-
ting.
OK