Switching the washer-dryer on
Press the button.
The welcome screen will light up.
The display will guide you through the
6 steps of the initial commissioning
process.
1. Setting the display language
You will be asked to select the display
language. It is possible to change the
language at any time via the Settings
menu.
Language
dansk
english (AU)
deutsch
english (CA)
Scroll to the left or the right until the
language you want appears.
Touch the sensor control for the lan-
guage you want.
The selected language will be high-
lighted in orange and the display will
change to the next setting.
Before using for the first time
2. Setting up Miele@home
Skip
To set up Miele@home now: touch
the
Tip: To postpone setup until later: touch
the
message will then appear in the display:
It is possible to set up later in "Settings" /
english (GB)
"Miele@home".
Confirm with the OK sensor control.
english (US)
Selecting a connection method
OK
Via WPS
Select the connection method you
wish to use.
You will then be guided by the display
and the Miele@mobile app.
Set up "Miele@home"?
sensor control.
Continue
sensor control. The following
Skip
.
Which connection method do you
want to use?
Continue
Via App
23