Miele WTR 860 WPM Operating Instructions Manual page 10

Warning and Safety instructions

This washer-dryer is supplied with a special lamp to cope with
particular conditions (e.g. temperature, moisture, chemical resist-
ance, abrasion resistance and vibration). This lamp must only be
used for the purpose for which it is intended. The lamp is not suit-
able for room lighting. Replacement lamps may only be fitted by a
Miele authorised technician or by the Miele Customer Service De-
partment.
The washer-dryer contains 1 light source corresponding to energy
efficiency class G.

The electrical socket must be easily accessible after installation so
that the washer-dryer can be disconnected from the electricity sup-
ply if necessary.

The washer-dryer must be isolated from the electricity supply
when cleaning and maintaining the machine and in the event of a
fault.

The Miele "Water protection system" protects from water damage
provided the following conditions are met:
- The machine is correctly plumbed in and connected to the electri-
city supply.
- If a fault or damage has been identified, the washer-dryer must be
examined by a competent person before further use, and repaired
if necessary.

The water inlet pressure must be at least 100 kPa and must not
exceed 1000 kPa.

Faulty components must only be replaced by genuine Miele ori-
ginal spare parts. Only when these parts are fitted can Miele guaran-
tee the safety standards of the machine.

If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
10