Starting The Programme - Miele WTR 860 WPM Operating Instructions Manual

6. Starting the programme
The programme can be started when
the Start/Stop sensor control is flashing
on and off.
 Touch the Start/Stop sensor control.
The door will lock and the wash pro-
gramme will start.
The programme status will appear in
the display.
 Washing

Time left
Cottons
The washer-dryer will keep you updated
on the programme stage and the dura-
tion remaining for the programme to
run.
If a delay start period has been selec-
ted, this will appear in the display.
Saving energy
After 10 minutes, the indicators dim.
The Start/Stop sensor control flashes
slowly.
To reactivate the indicators:
 Touch the Start/Stop sensor control
(this does not have any effect on a
programme that is running).
 11:02

2:25 h
Washing
Add laundry
Adding laundry
Laundry can be added or removed if
is illuminated in the display.
Add laundry
 Touch the
Add laundry
The following will appear in the display:
Please wait
The programme will stop and the door
will unlock.
 Open the door.
 Add or remove laundry.
 Close the door.
 Touch the Start/Stop sensor control.
The programme continues.
Please note:
Once a programme has started, the
washer-dryer cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a pro-
gramme, the machine will always
complete the programme cycle as-
suming a full load.
WASHING
sensor control.
41