Miele WTR 860 WPM Operating Instructions Manual page 90

Problem solving guide
General problems with the washer-dryer
Problem
Fabric conditioner is not
completely dispensed
or too much water re-
mains in the  com-
partment.
At the end of the pro-
gramme there is still li-
quid in the capsule.
The display is in a dif-
ferent language.
The display is dark.
The time left duration in
the display fluctuates.
90
Cause and remedy
The siphon tube is not correctly positioned or is
clogged.
 Clean the siphon, see "Cleaning and care - Clean-
ing the detergent dispenser drawer".
The small pipe in the detergent dispenser drawer
onto which the capsule is placed is blocked.
 Clean the small pipe.
This is not a fault. For technical reasons a small
amount of water will remain in the capsule.
A different language has been selected in "Settings"
"Language ".
 Set the language you want.
The flag symbol serves as a guide.
The display has switched off automatically to save
energy (Standby mode).
 Touch the Start/Stop sensor control. This switches
Standby off.
The countdown time adapts constantly to the cur-
rent washing and drying process.