Table of Contents
Advertisement
Settings
Extended cool down
The cooling down phase which takes
place before the end of a programme
can be extended if required. This cools
the garments down even more. The
cooling down phase can only be
extended if a drying level has been
selected. Extended cool down is not
active for timed drying.
The extended cool down time can be
set between 0 min (factory default
setting) and 18 min.
118
Network
Miele@home
Control the networking of your
washer-dryer with your Wi-Fi network.
Options
-
Set up
This message only appears if the
washer-dryer has not yet been
connected to a Wi-Fi network.
Please refer to "Before the first use"
for instructions on how to set up the
connection.
-
Deactivate
The setting is only visible if
Miele@home is activated.
Miele@home remains set up, the Wi-
Fi function is switched off.
-
Activate
The setting is only visible if
Miele@home is deactivated.
The Wi-Fi function is reactivated.
-
Connection status
The setting is only visible if
Miele@home is activated.
The Wi-Fi reception quality, network
name and IP address are displayed.
-
Set up again
The setting is only visible if
Miele@home is set up.
Resets the Wi-Fi login (network) to
immediately re-establish a new
connection.
-
Reset
Advertisement
Table of Contents
