Menu I - Manual Control - Data Aire gForce Ultra User Manual

8.2.9 Menu I – Manual Control
Menu I allows manually running different unit components (the Service Level password
is required). This menu should be used during service of the unit.
Press the ENTER key.
The following screen will be displayed (values are for reference only):
NOTE:
Once the set time has elapsed the functions will return to normal
programmed operation (the default is 60 seconds).
Each component can be manually tested. Press the ENTER key to move the cursor to
the selected component. To change from Auto (automatic) to Man (manual) press the
DOWN key. To change from OFF to ON press the DOWN key.
Move the cursor to the title block by pressing the ENTER key stepping through all the
inputs. To return to the main Menu press the ESC key or to view the following screen
press the DOWN key.
The following screen will be displayed (values are for reference only):
10-2014
The "Return to Auto" is programmable from 10 to 300 seconds.
gForce User Manual ● 71