Menu C - Clock/Scheduler; Menu D - Input/Output; Menu E - Historical Data - Data Aire gForce Ultra User Manual

Press the MENU key to return to the Main Menu
8.2.3 Menu C – Clock/Scheduler
Disregard this Menu – it is not applicable to in-row cooling units.
8.2.4 Menu D – Input/Output
This is a view only menu. The values are factory set and only if instructed by Data Aire
Engineering or Technical Service personnel should these be changed.
8.2.5 Menu E – Historical Data
Menu allows viewing of alarms, component runtime hours and re-setting of runtimes.
Alarms will be displayed by the alarm name and the time/date of occurrence. In
addition, it will display the temperature and humidity at the time of the alarm.
The following will appear on the first Menu E screen (values are for reference only):
Press ENTER once for the cursor to stay on the " Scroll Up/Down?" line.
Press the UP or DOWN key to view additional alarms.
Press the ENTER key to return to the title line.
Press the DOWN key to Run Hours and Reset
The following will appear on the first Menu E screen (values are for reference only):
62 ● gForce Ultra User Manual 10-2014