Menu B - Setpoints - Data Aire gForce Ultra User Manual

NOTE:
programmed from 5 to 600 seconds (see Menu J – Factory Settings).
Once the selection is made, to leave Menu A, press the MENU key. The Main Menu
screen will continue to display other menus. To view any of these menus scroll to the
desired menu. Press the ENTER key. If you choose to return to the main screen, press
the Esc key.

8.2.2 Menu B - Setpoints

MENU B allows viewing and changing of Setpoints (Service Level password is required
for entry)
Press the UP or DOWN key until "B. Setpoint" appears and is highlighted. Press the
ENTER key.
Use the UP or DOWN key to scroll through the screens. Menu B has two screens.
The following screen will appear:
This is for the cooling temperature setpoint settings (to control the chilled water valve
or compressor capacity):
58 ● gForce Ultra User Manual
The start time is a programmable time delay. It can be
10-2014