Data Aire gForce Ultra User Manual page 63

This screen (and the following two screens) gives you the option to reset the runtimes.
Press the ENTER key to move the cursor over the No column. Press the UP or DOWN
key to change the setting for No to Yes. When changing from No to Yes, the runtime
will be erased to 0000.
Press the ENTER key to move the cursor. Follow the same procedure until all desired
changes are made. Return the cursor to the title line (at the top of the screen) by
pressing the ENTER key.
NOTE:
not applicable to gForce Ultra cooling units.
With the cursor flashing on the title, press the DOWN key to view the next screen
The following will appear on the second Menu E screen (values are for reference only):
10-2014
This screen and the subsequent two screens will have information
gForce User Manual ● 63