Mitsubishi Electric M Series Manual page 298

Hide thumbs Also See for M Series:
Table of Contents

Advertisement

CEILING CASSETTE MLZ-KA·VA Series
2. Vertical vane
(1) Press WIDE VANE button to change horizontal airflow direction.
•The vertical vane moves for about 30 seconds.
(After 30 seconds, the vertical vane moves to its original position. In this case, press WIDE VANE button again.)
(2) Press WIDE VANE button again to set horizontal airflow direction.
•The vertical vane stops and the airflow direction is set.
(3) Positioning
To confirm the standard position, the vane moves until it touches the vane stopper. Then the vane set to the desired
angle.
Confirming of standard position is performed in the following cases:
(a) When OPERATE/STOP (ON/OFF) button is pressed (POWER ON).
(b) When SWING is started.
f. TIMER OPERATION
1. How to set the time
(1) Press OPERATE/STOP (ON/OFF) button to start the air conditioner.
(2) Check that the current time is set correctly.
NOTE : Timer operation will not work without setting the current time. Initially "AM0:00" blinks at the current time display of
TIME MONITOR, so set the current time correctly with CLOCK SET button.
How to set the current time
(1) Press the CLOCK set button.
(2) Press the TIME SET buttons (
• Each time FORWARD button (
button(
) is pressed, the set time decreases by 1 minute.
• Pressing those buttons longer increases/decreases the set time by 10 minutes.
Press the CLOCK set button.
ON timer setting
(1) Press ON-TIMER button (
(2) Set the time of the timer using TIME SET buttons (
OFF timer setting
(1) Press OFF-TIMER button (
(2) Set the time of the timer using TIME SET buttons (
Each time FORWARD button (
button (
) is pressed, the set time decreases by 10 minutes.
2. Cancel
To cancel ON timer, press ON-TIMER button (
To cancel OFF timer, press OFF-TIMER button (
TIMER is cancelled and the display of set time disappears.
C-296
and
) to set the current time.
) is pressed, the set time increases by 1minute, and each time BACKWARD
START
) during operation.
STOP
) during operation.
) is pressed, the set time increases by 10 minutes; each time BACKWARD
START
).
STOP
).
and
) .
and
).
M series

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents