Mitsubishi Electric M Series Manual page 210

WALL-MOUNTED MSZ-FD•VA/S Series
Operation and operating range
i-see sensor moves 30 degrees from the center in both right and left side.
i-see Sensor turning to the left
i-see Sensor operates as follows in accordance with AREA setting made with the remote controller.
"AUTO" in AREA setting: first turning to the LEFT for adjusting the position then.....
CENTER
"RIGHT" in AREA setting: first turning to the LEFT for adjusting the position then....
CENTER
"LEFT" in AREA setting: first turning to the LEFT for adjusting the position then....
CENTER
The sensor finishes turning to one area to another for 3 seconds and it operates one area for 5 seconds.
h. PLASMA ( ) OPERATION
(1) Press OPERATE/STOP (ON/OFF) button to start the air conditioner.
(2) Press PLASMA button to set PLASMA operation.
PLASMA lamp turns ON and plasma electrode unit is energized.
(3) Press PLASMA button again to cancel PLASMA operation.
Description of PLASMA operation:
Plasma operation consists of deodorizing and air purifying features.
Particles of odor-releasing substances are absorbed and decomposed by the plasma deodorizing filter.
Particles of allergens such as pollen and house dust are collected by the plasma anti-allergy filter.
These filters work with negative ions generated by the plasma electrode unit.
C-208
i-see Sensor turning to the center
RIGHT CENTER
(The sensor turns to the right, left and center.)
RIGHT CENTER
(The sensor turns to the right and center.)
LEFT CENTER
(The sensor turns to the left and center.)
i-see Sensor turning to the right
LEFT CENTER......
RIGHT CENTER......
LEFT CENTER......
M series