Mitsubishi Electric M Series Manual page 201

M series WALL-MOUNTED MSC/MS/MSH Series
When ECONO COOL button is pressed in COOL mode, set temperature is automatically set 2 °C higher.
Also the horizontal vane swings in various cycle.
SWING operation makes you feel cooler than set temperature. So, even though the set temperature is higher, the air
conditioner can keep comfort. As a result, energy can be saved.
ECONO COOL operation is cancelled when ECONO COOL button, VANE CONTROL button, VANE button or
LONG button is pressed or changed to other operation mode.
<MS-GE50,GA60,GD80/MSH-GE50,GA60,GD80>
2. Vertical vane <MS-GE50,GA60,GD80/MSH-GE50,GA60,GD80>
To confirm the standard position, the vane moves until it touches the vane stopper. Then the vane is set to the desired angle.
in the following case:
<MSH>
C-199