CEStronics CES OMEGA FLEX Manual page 9

2 Signalling while using the master media
2. Hold the System-Master again for ca 1 second in the reading field of the locking device and
then remove it from the reading field.
The following signal appears:
1x long green and 1x long beep
The System-Master is now authorised for this locking device.
Troubleshooting:
Signalling
During step 1:
The System-Master does not have the cor
rect system identification code.
During step 2:
Another System-Master has already been
authorised for this locking device.
Signalling of OMEGA FLEX Locking devices
Reason
Use the System-Master with correct sys
tem identification code.
Solution
Since, at any given time only one
System-Master exists which can
be authorised on the basis of
individual system identification
code for a locking device, there is
reason to suspect manipulation.
Contact your CES partner
immediately!
Page 9 of 39