Deleting Locking Media Authorisations - CEStronics CES OMEGA FLEX Manual

2 Signalling while using the master media

2.6 Deleting locking media authorisations

A locking media can be deleted from a locking device only with the same Program-Master
with which it was authorised.
Required media:
Program-Master with which the locking media was authorised
l
Authorised locking media, whose authorisation is to be deleted.
l
Procedure:
1. Hold the Program-Master for ca 1 second in the reading field of the locking device to start
the "delete locking media" mode.
The following signal appears:
1x short green and 1x short beep
2. Now you can delete any number of locking media one after the other by holding each
locking media for ca 2 second in front of the reading field of the locking device.
The following signal appears for each locking media:
2x short green and 2x short beep
Signalling of OMEGA FLEX Locking devices Page 17 of 39