Transmitting Programming Jobs With An Rf-Stick To A Locking Device - CEStronics CES OMEGA FLEX Manual

2.18 Transmitting programming jobs with an RF-Stick to a locking
device
Required master media and administration devices:
RF-Stick-Master
l
RF-Stick
l
PC with OMEGA Client installed
l
Procedure for creating programming jobs:
1. Start the OMEGA Client and log in with your user name and password.
2. Set the desired changes in the OMEGA Client.
3. Start your changes accordingly as a change programming or new programming, e.g.
through P
ROGRAMMING
The status display of the OMEGA Client shows now "programming required". The individual
programming jobs are shown under "Programming status".
Procedure for transmitting programming jobs via an RF-Stick:
Page 32 of 39
> P .
ROGRAM ALL CHANGES
2 Signalling while using the master media
Signalling of OMEGA FLEX Locking devices