CEStronics CES OMEGA FLEX Manual page 18

Signalling of the locking devices
Table of Contents

Advertisement

3. Hold the Program-Master for ca 1 second in the reading field of the locking device to end
the "delete locking media" mode
The following signal appears:
1x long green and 1x long beep
The "delete locking media mode" will end automatically after 5 seconds. The locking media
which were previously held before the locking device will thereby be deleted from the
locking device.
All locking media, which were held in the reading field, are now no more authorised to open this
locking device.
Troubleshooting:
Signalling
During step 1:
The program-Master was not yet author
ised for this locking device.
During step 2:
The locking media was not authorised
with the Program-Master used
The locking media was held for too short
a period in the reading field of the locking
device. The authorisation was not deleted.
Page 18 of 39
Reason
Authorise the Program-Master.
Use Program-Master with which the lock
ing media was authorised
Hold the locking media longer in the read
ing field of the locking device.
2   Signalling while using the master media
Solution
Signalling of OMEGA FLEX Locking devices

Advertisement

Table of Contents
loading

Table of Contents