Deactivating Release Mode - CEStronics CES OMEGA FLEX Manual

2.10 Deactivating release mode

Required master media:
Release-Master
l
The Program-Master must first be authorised for the locking device on which it is to be
used
Procedure:
1. Hold the Release-Master before the reading field of the locking device.
After ca. 2 second, the following signal appears:
2x short green and 2x short beep
The release mode is now deactivated. To gain access, authorised locking media must now again be
held before the locking device.
Troubleshooting:
Signalling
A higher-priority opening mode is cur
rently active
The Release-Master is not authorised.
Page 22 of 39
Reason
Deactivate the
opening mode with higher priority.
Authorise the
Release-Master
2 Signalling while using the master media
Solution
Signalling of OMEGA FLEX Locking devices