Deactivating The Office Mode - CEStronics CES OMEGA FLEX Manual

1 Signalling during operation
Troubleshooting:
Problem/Signalling
No signal after ca 2 seconds. The
office mode is not active. The
coupling of the locking device
engages, but disengages again
after expiry of the opening
duration.

1.3 Deactivating the office mode

Required devices and locking media:
Locking media, which is authorised for the office function
l
Locking device, which is authorised for the office function
l
Procedure:
1. Hold the locking media authorised for the office function for ca 2 seconds in the reading
field of the locking device.
As soon as the locking media is in the reading field, the following signal appears:
1x long green and 1x long beep
After ca 2 second, another signal appears:
1x long green and 1x long beep, 1x short green and 1x short beep
The office mode is now deactivated. The door can be opened now only with authorised locking
media.
Troubleshooting:
Signalling
After 2 seconds The office mode cannot be deactivated
Signalling of OMEGA FLEX Locking devices
Reason
The locking device is not authorised
for the office function.
The office function is not available at
this time.
The locking media is not authorised
for the office function.
Reason
Solution
Have the locking device
authorised for the office function
by the system administrator.
Enquire with the system
administrator, when the office
function in this locking device can
be activated.
Have the locking media
authorised for the office function
by the system administrator.
Solution
Have your locking media authorised for
Page 5 of 39