CEStronics CES OMEGA FLEX Manual page 31

2 Signalling while using the master media
2. The locking device shows now the quality of the wireless connection:
The Access-Point associated with the Update-Terminal shows during wireless connection
test the quality of the wireless connection with the same signalling as the locking device.
3. Hold the RF-Trace-Master ca 1 second in the reading field to end the wireless connection
quality display.
The following signal appears:
1x long green and 1x long beep
The testing of the wireless connection quality is finished herewith.
After 3 minutes, the wireless connection quality display will end automatically.
Troubleshooting:
Signalling
The locking device does not belong to the
variant NET or VA .
Signalling of OMEGA FLEX Locking devices
Very good
sufficient
weak
No wireless connection
Reason
Der RF-Trace-Master kann nur an NET-
und VA-Geräte verwendet werden.
Solution
Page 31 of 39