Deleting System-Master - CEStronics CES OMEGA FLEX Manual

2.4 Deleting System-Master

Effects of deletion of System-Master
Deletion of the System-Master results in deletion of all master media and locking author
l
isations from a locking device.
All settings in the locking device, which were made with the OMEGA Client software (e.g.
l
Time profiles, locking media authorisations etc.), remain intact after deletion of the Sys
tem-Master.
Deletion of the System-Master deactivates all active opening modes of a locking device.
l
Online devices remain in online mode though.
The opening period set with the Time-Master remains intact after deletion of the Time-
l
Master.
Required master media:
System-Master
l
Procedure:
1. Hold the System-Master for ca. 5 seconds in the reading field of the locking device.
The following signal appears:
2x short green and 2x short beep
2. Remove the System-Master from the reading field of the locking device.
It is automatically ensured that no access is possible in that if the coupling of the locking device
was engaged, disengages.
The System-Master is now deleted from this locking device.
Page 14 of 39
2 Signalling while using the master media
Signalling of OMEGA FLEX Locking devices