Mazda CX-3 Owner's Manual page 682

Be sure to reinstall the same nuts you
removed or replace them with metric
nuts of the same configuration:
Because the wheel studs and wheel
nuts on your Mazda have metric
threads, using a non-metric nut is
dangerous. On a metric stud, it would
not secure the wheel and would
damage the stud, which could cause
the wheel to slip off and cause an
accident.
6. Remove the tyre blocks and store the
tools and jack.
7. Store the damaged tyre in the luggage
compartment.
8. Check the inflation pressure. Refer to
Tyres on page 9-9.
9. Have the flat tyre repaired or replaced
as soon as possible.
NOTE
(With tyre pressure monitoring system)
Do not press the tyre pressure monitoring
system set switch after installing the spare
tyre. The switch is only to be pressed after
installing the repaired flat tyre or
installing a replacement tyre (page 4-35).
CX-3_8GT4-EE-18D_Edition8_old
WARNING
Do not drive with any tyres that have
incorrect air pressure:
Driving on tyres with incorrect air pressure
is dangerous. Tyres with incorrect pressure
could affect handling and result in an
accident. When you check the regular tyres'
air pressure, check the spare tyre, too.
NOTE
To prevent the jack and tool from rattling,
store them properly.
If Trouble Arises
Flat Tyre
7-21
2019-11-14 12:53:52