Mazda CX-3 Owner's Manual page 633

Zoom-zoom
Hide thumbs Also See for CX-3:
Table of Contents

Advertisement

Maintenance and Care
Owner Maintenance
Tyres
For reasons of proper performance, safety,
and better fuel economy, always maintain
recommended tyre inflation pressures and
stay within the recommended load limits
and weight distribution.
WARNING
Using Different Tyre Types:
Driving your vehicle with different types of
tyres is dangerous. It could cause poor
handling and poor braking; leading to loss
of control.
Except for the limited use of the temporary
spare tyre, use only the same type tyres
(radial, bias-belted, bias-type) on all four
wheels.
Using Wrong-Sized Tyres:
Using any other tyre size than what is
specified for the vehicle (page 9-9) is
dangerous. It could seriously affect ride,
handling, ground clearance, tyre clearance,
and speedometer calibration. This could
cause you to have an accident. Use only
tyres that are the correct size specified for
the vehicle.
▼ Tyre Inflation Pressure
WARNING
Always inflate the tyres to the correct
pressure:
Overinflation or underinflation of tyres is
dangerous. Adverse handling or
unexpected tyre failure could result in a
serious accident.
Refer to Tyres on page 9-9.
6-42
*Some models.
CX-3_8GT4-EE-18D_Edition8_old
Use only a Mazda-genuine tyre valve cap:
Use of a non-genuine part is dangerous as
the correct tyre air pressure cannot be
maintained if the tyre valve becomes
damaged. If the vehicle is driven under this
condition, the tyre air pressure will
decrease which could result in a serious
accident. Do not use any part for the tyre
valve cap that is not a Mazda-genuine
part.
Inspect all tyre pressures monthly
*
(including the spare
) when the tyres are
cold. Maintain recommended pressures for
the best ride, handling, and minimum tyre
wear.
Refer to the specification charts (page
9-9).
(With tyre pressure monitoring system)
After adjusting the tyre pressure,
initialization of the tyre pressure
monitoring system is necessary to make
the system operate normally.
Refer to Tyre Pressure Monitoring System
Initialization on page 4-232.
NOTE
Always check tyre pressure when tyres
are cold.
Warm tyres normally exceed
recommended pressures. Do not release
air from warm tyres to adjust the
pressure.
Underinflation can cause reduced fuel
economy, uneven and accelerated tyre
wear, and poor sealing of the tyre bead,
which will deform the wheel and cause
separation of tyre from rim.
2019-11-14 12:53:52

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents