Mazda CX-3 Owner's Manual page 33

When Driving
Setting the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function)
How to Change the Set Vehicle Speed
To accelerate/decelerate using the SET switch
When you press the SET + switch, the vehicle accelerates and when you press the
SET - switch, it decelerates.
Short press
Long press
To increase speed using accelerator pedal
Depress the accelerator pedal and press and release the SET + switch or SET -
switch at the desired speed. If the switch is not operated, the system returns to the
set speed after you release your foot from the accelerator pedal.
Turning off the system
Press the OFF/CANCEL switch two times while the MRCC with Stop & Go
function system is operating to switch off the system.
Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead
because the vehicle applies the brakes suddenly while you
are travelling in headway control, the warning sound
activates and the brake warning is indicated in the display.
Always verify the safety of the surrounding area and
depress the brake pedal while keeping a safer distance
from the vehicle ahead. Additionally, always keep a
safer distance from the vehicles behind you.
30
For details, refer to Section 4, "i-ACTIVSENSE".
CX-3̲8GT4EE18D̲Edition8̲QuickGuide.indb 32 CX-3̲8GT4EE18D̲Edition8̲QuickGuide.indb 32
European models
1 km/h (1 mph)
10 km/h (5 mph)
Except European models
5 km/h (5 mph)
2019/11/22 9:08:02 2019/11/22 9:08:02