Mazda CX-3 Owner's Manual page 444

Air intake selector (Type B)
This lever controls the source of air
entering the vehicle.
It is recommended that under normal
conditions the switch be kept in the
outside air position.
Recirculated air position (
Outside air is shut off. Air within the
vehicle is recirculated.
Outside air position (
Outside air is taken into the vehicle. Use
this position for normal ventilation and
heating.
WARNING
Do not use the position in cold or rainy
weather:
Using the position in cold or rainy
weather is dangerous as it will cause the
windows to fog up. Your vision will be
hampered, which could lead to a serious
accident.
Rear window defogger switch
Press the rear window defogger switch to
defrost the rear window.
Refer to Rear Window Defogger on page
4-74.
CX-3_8GT4-EE-18D_Edition8_old
▼ Heating
1. Set the mode selector dial to the
2. (Type A)
)
3. Set the temperature control dial to the
4. Set the fan control dial to the desired
)
5. If dehumidified heating is desired, turn
NOTE
If the windscreen fogs up easily, set the
mode selector dial to the
If cooler air is desired at face level, set
the mode selector dial to the
and adjust the temperature control dial
to maintain maximum comfort.
The air to the floor is warmer than air
to the face (except when the temperature
control dial is set at the extreme hot or
cold position).
Air-Conditioning System
position.
Set the air intake selector to the outside
air position.
(Type B)
Set the air intake selector to the
position.
hot position.
speed.
on the air conditioner.
2019-11-14 12:53:52
Interior Features
position.
position
5-9