Mazda CX-3 Owner's Manual page 564

Symptom
Pairing cannot be performed again.
It takes time for automatic connec‐
tion.
Unable to perform pairing.
Does not connect automatically
when starting the engine.
Automatically connects, but then
disconnects suddenly.
Disconnects intermittently.
CX-3_8GT4-EE-18D_Edition8_old
Audio Set [Type B (touchscreen)]
Cause
The pairing information paired to
®
the Bluetooth unit or device is not
recognised correctly.
There are a lot of paired Bluetooth
devices.
®
The Bluetooth function and the
*1
Find Mode/Visible setting on the
device may turn off automatically
after a period of time has elapsed
depending on the device.
The device is in a location in which
radio wave interference can occur
easily, such as inside a bag in a rear
seat, in a rear pocket of a pair of
pants.
Interior Features
Solution method
Perform pairing using the following
procedure:
1. Delete the applicable Blue‐
tooth ® device on the Mazda
Connect.
2. Delete "Mazda" from the Blue‐
®
tooth search screen of the
®
Bluetooth device.
3. Perform pairing again.
If pairing is not possible after trying
the procedure, turn off the power of
the Bluetooth ® device once, then
turn it back on. If pairing is still not
possible after this, contact an expert
repairer (we recommend an Author‐
ised Mazda Repairer) or Mazda
®
Bluetooth Hands-Free Customer
Service.
Delete the pairing information for
®
unused Bluetooth devices.
®
If it takes time for an automatic con‐
nection even though the above oper‐
ation has been done, do a manual
connection.
Check whether the Bluetooth
tion and the Find Mode/Visible set‐
*1
ting on the device are turned on
and pairing or reconnect.
Move the device to a location in
which radio wave interference is
less likely to occur.
5-129
2019-11-14 12:53:52
® func‐