Mazda CX-3 Owner's Manual page 204

▼ Vehicle Roll Prevention Function (Automatic transaxle)
Vehicles with the i-stop function are equipped with a vehicle roll prevention function. This
function prevents the vehicle from rolling, such as when releasing the brake pedal while on
a slope under the following conditions:
While engine idling is stopped (prevents the vehicle from rolling back)
When the engine restarts after releasing the brake pedal (prevents the vehicle's sudden
movement due to vehicle creep), sudden movement of the vehicle is prevented by
controlling the brakes or the automatic transaxle.
Release foot from brake pedal
Engine restarted
WARNING
Do not rely completely on the vehicle roll prevention function.
The vehicle roll prevention function is a supplementary function which operates for a
maximum of 4 seconds after releasing the brake pedal and accelerating the vehicle from an
engine idling stop condition. Over reliance on the system may result in an unexpected
accident if the vehicle were to suddenly accelerate. Before starting to drive the vehicle,
always confirm the safety of the surroundings and operate the selector lever, brake pedal,
and accelerator pedal appropriately. Note that the vehicle may move suddenly depending
on the vehicle's load or if it is towing something.
CX-3_8GT4-EE-18D_Edition8_old
Start/Stop Engine
Vehicle brake force maintained
Acceleration
2019-11-14 12:53:52
When Driving
4-19