Mazda CX-3 Owner's Manual page 485

Interior Features
Audio Set [Type A (non-touchscreen)]
▼ Device selection (Bluetooth
If several devices have been paired, the
®
Bluetooth unit links the device last
paired. If you would like to link a different
paired device, it is necessary to change the
link. The order of device priority after the
link has been changed is maintained even
when the ignition is switched off.
1. Using the audio control dial, select the
link change mode "LINK CHANGE"
in the "BT SETUP" mode. (Refer to
®
"Bluetooth audio device set-up" for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the currently linked
®
Bluetooth audio device is displayed.
®
If no Bluetooth audio device is
currently linked, the name of the first
device among the paired devices is
displayed.
5-50
CX-3_8GT4-EE-18D_Edition8_old
® 4. Turn the audio control dial to select the
Audio)
name of the device you would like to
link.
5. Press the audio control dial to select
the device you would like to link.
The " " symbol disappears, and
"PAIRING" flashes in the audio
display.
NOTE
When "GO BACK" is selected and the
audio control dial is pressed, the
display returns to "LINK CHANGE".
6. If the link to the desired device is
successful, the " " symbol is displayed
again, together with "LINK
CHANGED". "LINK CHANGED" is
displayed for 3 seconds, then it returns
to the normal display.
NOTE
Some Bluetooth
a certain amount of time before the
" " symbol is displayed.
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
®
audio devices need
2019-11-14 12:53:52