Bluetooth ® Preparation - Mazda CX-3 Owner's Manual

®
Bluetooth Preparation
▼ Device pairing
®
To use Bluetooth audio and Hands-Free,
the device equipped with Bluetooth
to be paired to the unit using the following
procedure. A maximum of 7 devices
®
including Bluetooth audio devices and
hands-free mobile phones can be paired.
NOTE
®
The Bluetooth system may not operate
for 1 or 2 minutes after the ignition is
switched to ACC or ON. However, this
does not indicate a problem. If the
®
Bluetooth system does not connect
automatically after 1 or 2 minutes have
elapsed, make sure that the Bluetooth
setting on the device is normal and
attempt to reconnect the Bluetooth
device from the vehicle side.
®
If Bluetooth -enabled devices are used
in the following locations or conditions,
connection via Bluetooth
possible.
The device is in a location hidden
from the centre display such as behind
or under a seat, or inside the glove
compartment.
The device contacts or is covered by a
metal object or body.
The device is set to power-saving
mode.
Pairing Procedure
1. Select the icon on the home screen
to display the Settings screen.
2. Select the tab.
3. Select .
CX-3_8GT4-EE-18D_Edition8_old
Audio Set [Type B (touchscreen)]
4. Turn the Bluetooth
5. Select
message and switch to the device
operation.
6. Using your device, perform a search
for the Bluetooth
®
has
device).
7. Select "Mazda" from the device list
searched by the device.
8. (Device with Bluetooth
Input the displayed 4-digit pairing
code into the device.
(Device with Bluetooth
or higher)
Make sure the displayed 6-digit code
on the audio is also displayed on the
device, and touch the
Connection permission and phonebook
access permission for your mobile
®
device may be required depending on
the mobile device.
®
9. If pairing is successful, the functions
of the device connected to Bluetooth
are displayed.
10. (Devices compatible with Mazda
®
may not be
E-mail / SMS function)
SMS (Short Message Service)
messages, and E-mail for the device
are downloaded automatically. A
download permission operation for
your device may be required
depending on the device.
NOTE
When Call history and messages are
downloaded automatically, each
automatic download setting must be on.
Refer to Communication Settings on
page 5-121.
The E-mail and SMS functions may not
be available in some regions.
Interior Features
®
setting on.
to display the
®
device (Peripheral
®
version 2.0)
®
version 2.1
.
®
5-101
2019-11-14 12:53:52