Safety Instructions These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC)*1), and other safety regulations.
Page 4
Safety Instructions Caution We develop, design, and manufacture our products to be used for automatic control equipment, and provide them for peaceful use in manufacturing business. Use in non-manufacturing business is not covered. Products we manufacture and sell cannot be used for the purpose of transactions or certification specified in the Measurement Act.
Page 5
JSY3000-L Series Precautions for 5 Port Solenoid Valve 1 Be sure to read before handling. Refer to main text for detailed precautions on every series. Design / Selection 9. Regarding a vacuum switch valves and vacuum release valves Warning If a non-vacuum valve is installed in the middle of a piping system that contains a vacuum, the vacuum 1.
Page 6
JSY3000-L Series Precautions for 5 Port Solenoid Valve 2 Be sure to read before handling. Refer to main text for detailed precautions on every series. 4. Surge voltage intrusion Design / Selection With non-polar type solenoid valves, at times of...
JSY3000-L Series Precautions for 5 Port Solenoid Valve 3 Be sure to read before handling. Refer to main text for detailed precautions on every series. Design / Selection Piping Caution Caution 6. Operation for air blowing 1. Refer to the Fittings and Tubing...
JSY3000-L Series Precautions for 5 Port Solenoid Valve 4 Be sure to read before handling. Refer to main text for detailed precautions on every series. Lubrication Caution Warning 1. When extremely dry air is used as the 1. Lubrication fluid, degradation of the lubrication...
JSY3000-L Series Precautions for 5 Port Solenoid Valve 5 Be sure to read before handling. Refer to main text for detailed precautions on every series. Operating Environment Caution Caution 1. Drain flushing 1. Temperature of ambient environment Remove drainage from the air filters regularly.
Page 10
JSY3000-L series Specific Product Precautions 1 Be sure to read this before handling. Environment ■Push-turn locking lever type [E type] Push down on the manual override by finger until it stops, Warning and then turn it 60° clockwise. The manual override is then locked.
Page 11
JSY3000-L series Specific Product Precautions 2 Be sure to read this before handling. Light/Surge Voltage Suppressor Continuous Duty Caution If a valve is energized continuously for long periods of time, the rise in temperature due to heat-up of the coil assembly...
Page 12
JSY3000-L series Specific Product Precautions 3 Be sure to read this before handling. Countermeasure Light Indication for Surge Voltage Intrusion Caution Caution When equipped with indicator light and surge voltage suppressor, the light window turns orange when With non-polar type valves(JSY3000series), at times...
JSY3000-L series Specific Product Precautions 4 Be sure to read this before handling. How to Replace One-touch Fittings One-touch Fittings Caution Caution ■Tube attachment/detachment for One-touch By replacing One-touch fittings of manifold base, it is possible to change the connection diameter of the 4(A), fittings 2(B), 1(P), 3/5(E) ports.
TROUBLE SHOOTING Trouble Possible cause Countermeasures 1) Operation failure or sticking of the - Replace the valve. The valve operates main valve. - Clean the air supply. when the manual ● Foreign matter from the piping and air override button is - If incorrect oil has been used for pushed? source got caught in the main valve,...
Page 15
For valve non-conformance, take following Trouble Possible causes Countermeasures countermeasures referring to trouble. 1) Leakage voltage -Check the leakage voltage. The valve is slow. When the valve is turned off, it became -Keep the leakage voltage at 3% of the Actuators including slow due to the leakage voltage.
Need help?
Do you have a question about the JSY3000-L Series and is the answer not in the manual?
Questions and answers