Page 1 Plug-in Compact 5-Port Solenoid Valve Size reduction has been made possible thanks to a flow increase. space saving weight reduction large flow rate This allows for , and a ∗1 The cylinder speed is 300 mm/s. ∗ ∗ ∗ Ø Ø...
Page 2 Compact 5-Port Solenoid Valve JSY1000/3000/5000 Plug-in Series Series Map JSY1000 JSY3000 JSY5000 Valve width reduction reduction reduction 15.5 24.6 1500 Weight 1140 3700 reduction reduction reduction Lightweight: 59 % lighter 1597 1500 g 3700 g VQ4000 JSY5000 JSY5000 Series times Q [l/min (ANR)] Lightweight: 32 % lighter 1597...
Page 3 JSY3000/5000 With power- Standard saving circuit ∗1 Made to Order ∗2 The JSY1000 series is only available as the power-saving type. Connector type manifold A 4-position dual 3-port valve is available. ¡Features two 3-port valves built into one body Plug-in...
Page 4 Compact 5-Port Solenoid Valve JSY1000/3000/5000 Plug-in Series The EX600-W is compatible with wireless systems. series Noise resistance High-speed connection Communication response ¡Uses the 2.4 GHz ISM frequency band ¡ From power supply ON to start of communication: ¡ Wireless communication signal ∗...
Page 5 Compact 5-Port Solenoid Valve JSY1000/3000/5000 Plug-in Series Application Examples JSY5000 JSY3000 JSY1000...
Page 6 Compact 5-Port Solenoid Valve JSY1000/3000/5000 Plug-in Series Series Variations Port size Flow rate 4(A), 2(B) port Q [l/min (ANR)] 4/2 5/3 Rated 1(P), Type of actuation (A/B EA/EB) voltage 3/5(E) Ø 2 Ø 4 Ø 6 Ø 8 Ø 10 Ø 12 port 4(A), 2(B) port...
Page 7 Compact 5-Port Solenoid Valve JSY1000/3000/5000 Plug-in Series Wiring Manifold options Valve options Common specifications Pitch width [mm] — p. 132 p. 132 p. 132 p. 133 p. 133 p. 133 External Individual External pilot pilot 11.5 ∗1 Refer to “Manifold Specifications” on pages 17 and 18 for details on IP67. Manifold Options SUP/EXH blocking disk Labels for blocking disks...
Page 8 Compact 5-Port Solenoid Valve JSY1000/3000/5000 Plug-in Series Vacuum Unit ZK2 Combination Manifold JSY3000 valves and ZK2 ejectors can be connected to the same manifold. compact body reduced wiring/wiring labour This allows for a Fieldbus compatible The centralised electrical wiring can be connected to the fieldbus system. ¡For Input/Output DeviceNet™, PROFIBUS DP, CC-Link, EtherNet/IP™, EtherCAT, PROFINET, EX600...
Page 9 C O N T E N T S ······························· Optimum Actuation Size Chart of Air Cylinder p. 9 Plug-in Connector Connecting Base ···································································· Valve Speciﬁ cations p. 13 ································································ Manifold Speciﬁ cations p. 17 ··········································································· Response Time p. 14 ··········································································· Manifold Weight p.
Page 10 Optimum Actuation Size Chart of Air Cylinder For JSY1000, A, B port: Ø 4 Horizontal Vertical (Upward) Average speed [mm/s] Ø 6 CJ2 series Pressure: 0.5 MPa Ø 10 Load ratio: 50 % Stroke: 60 mm Ø 16 Ø 20 Ø...
Page 11 Optimum Actuation Size Chart of Air Cylinder For JSY1000, A, B port: Ø 6 Horizontal Vertical (Upward) Average speed [mm/s] Ø 6 CJ2 series Pressure: 0.5 MPa Ø 10 Load ratio: 50 % Stroke: 60 mm Ø 16 Ø 20 Ø...
Page 12 Optimum Actuation Size Chart of Air Cylinder For JSY3000, A, B port: Ø 8 Horizontal Vertical (Upward) Average speed [mm/s] Ø 32 CM2 series Pressure: 0.5 MPa Load ratio: 50 % Stroke: 300 mm Ø 40 Ø 50 Ø 63 CA2 series Pressure: 0.5 MPa Load ratio: 50 %...
Page 13 Optimum Actuation Size Chart of Air Cylinder For JSY5000, A, B port: Ø 12 Horizontal Vertical (Upward) Average speed [mm/s] 1000 Ø 50 Ø 63 CA2 series Pressure: 0.5 MPa Load ratio: 50 % Stroke: 500 mm Ø 80 Ø 100 Ø...
Page 14 Refer to page 139 for details on securing the DIN rail mounting type manifold. ∗3 The JSY1000 series is only available as the power-saving type. Standard type (without power-saving circuit) cannot be selected. ∗4 For details, refer to page 137.
Page 15 JSY53/4/500 3-position JSY5A/B/C00 4-position dual 3-port valve ∗1 Based on dynamic performance test, JIS B 8419-2010 (Coil temperature: 20 °C, at rated voltage) Valve Weight JSY1000 Series JSY5000 Series Valve model Type of actuation Weight [g] Valve model Type of actuation...
Page 16 JSY1000/3000/5000 Series Valve Construction Rubber Seal 2-position single 2-position double (EA) (EB) 2-position single 2-position double (A)4 2(B) (A)4 2(B) (EA)5 3(EB) (EA)5 3(EB) 3-position closed centre/exhaust centre/pressure centre 4-position dual 3-port valve 3-position closed centre 3-position exhaust centre 4-position dual 3-port valve N.C.
Page 17 JSY3000/5000 Series Valve Replacement Parts: Pilot Valve ∗ How to Order Pilot Valves (With a gasket and two mounting screws) V112 How to replace pilot valves Pilot valve assembly Pilot valve assembly ∗1 ∗ Pilot cover Gasket Gasket Coil type Series Part no.
Page 18 Type JSY1000/3000/5000 Series Connector Connecting Base Plug-in Manifold Speciﬁ cations D-sub connector Flat ribbon cable Model FW type ∗ FC type ∗ PC type ∗ PGC type ∗ PHC type ∗ F type P type PG type PH type Manifold type Plug-in connector connecting base SUP/EXH port type Common SUP/EXH (Common for the 3/5 port)
Page 19 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Terminal block box Lead wire Serial wiring type type type type type T type TC type L type (EX600) (EX245) (EX250) (EX260) (EX120) Plug-in connector connecting base Common SUP/EXH (Common for the 3/5 port) 2 to 20 stations 2 to 24 stations 2 to 16 stations...
Page 20 JSY1000/3000/5000 Series Connector Wiring Layout For both serial and parallel wiring, additional valves are sequentially assigned pins on the connector. This makes it completely unnecessary to disassemble the connector unit. Single solenoid valve is installed to all double wiring. (in the case of all double wiring) (Manifold speciﬁ...
Page 22 Connector Connecting Base Plug-in D-sub Connector Flat Ribbon Cable Type 10 JSY1000/3000/5000 Series Side Ported Internal Pilot How to Order Manifolds JJ5SY 3 10 F 1 05 D Made to Order (Refer to page 135 for details.) Speciﬁ cation External pilot (SUP/EXH block assembly) Series Type Connector type...
Page 23 (continuous duty type) specification. Refer to “Made to Order” on page 135. For the JSY1000 series, only the power-saving circuit specification Protective class is available. ( Mark: class...
Page 24 JSY1000/3000/5000 Series Side Type Ported (Applicable to Ø 2 and Ø 4 ﬁ ttings) JSY1000 D-sub Connector (IP40/Connector Entry Direction Adjustable) Dimensions: Series JJ5SY1-10F Stations One-touch ﬁ tting (Connector entry upward direction) [4(A), 2(B) port] Applicable tubing O.D. C2: Ø 2 (SMC) Station 1 Station n C4: Ø...
Page 25 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported (Applicable to Ø 6 ﬁ ttings) JSY1000 D-sub Connector (IP40/Connector Entry Direction Adjustable) Dimensions: Series JJ5SY1-10F Stations (Connector entry upward direction) One-touch ﬁ tting [4(A), 2(B) port] Station 1 Station n Applicable tubing O.D.
Page 26 JSY1000/3000/5000 Series Side Type Ported JSY3000 D-sub Connector (IP40/Connector Entry Direction Adjustable) Dimensions: Series JJ5SY3-10F Stations Manifold block internal wiring speciﬁ cations —: Double wiring S : Single wiring (Connector entry upward direction) Station 1 Station n (17.4) One-touch ﬁ tting Pitch [1(P), 3/5(E) port] P=11.5...
Page 27 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported JSY5000 D-sub Connector (IP40/Connector Entry Direction Adjustable) Dimensions: Series JJ5SY5-10F Stations Manifold block internal wiring speciﬁ cations —: Double wiring S : Single wiring Station 1 Station n (Connector entry upward direction) (23.3) Pitch One-touch ﬁ...
Page 28 JSY1000/3000/5000 Series Side Type Ported JSY3000 D-sub Connector (IP67) Dimensions: Series JJ5SY3-10FW Stations Manifold block internal wiring speciﬁ cations —: Double wiring S : Single wiring (Connector entry upward direction) Station 1 Station n (17.4) One-touch ﬁ tting Pitch [1(P), 3/5(E) port] P=11.5 One-touch ﬁ...
Page 29 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported JSY5000 D-sub Connector (IP67) Dimensions: Series JJ5SY5-10FW Stations Manifold block internal wiring speciﬁ cations —: Double wiring S : Single wiring Station 1 Station n (Connector entry upward direction) (23.3) Pitch P=16 One-touch ﬁ...
Page 30 JSY1000/3000/5000 Series Side Type Ported (Applicable to Ø 2 and Ø 4 ﬁ ttings) JSY1000 D-sub Connector (IP20/Compact Type) Dimensions: Series JJ5SY1-10FC Stations One-touch ﬁ tting [4(A), 2(B) port] Applicable tubing O.D. C2: Ø 2 (SMC) Station 1 Station n C4: Ø...
Page 31 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported (Applicable to Ø 6 ﬁ ttings) JSY1000 D-sub Connector (IP20/Compact Type) Dimensions: Series JJ5SY1-10FC Stations One-touch ﬁ tting [4(A), 2(B) port] Station 1 Station n Applicable tubing O.D. C6: Ø 6 (SMC) (Connector entry upward direction) (21) One-touch ﬁ...
Page 32 JSY1000/3000/5000 Series Side Type Ported JSY3000 D-sub Connector (IP20/Compact Type) Dimensions: Series JJ5SY3-10FC Stations Manifold block internal wiring speciﬁ cations —: Double wiring S : Single wiring Station 1 Station n (Connector entry upward direction) One-touch ﬁ tting (17.4) [1(P), 3/5(E) port] Pitch Applicable tubing O.D.: Ø...
Page 33 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported (Applicable to Ø 2 and Ø 4 ﬁ ttings) JSY1000 Flat Ribbon Cable (IP40/Connector Entry Direction Adjustable) Dimensions: Series JJ5SY1-10 Stations One-touch ﬁ tting (Connector entry upward direction) [4(A), 2(B) port] Applicable tubing O.D.
Page 34 JSY1000/3000/5000 Series Side Type Ported (Applicable to Ø 6 ﬁ ttings) JSY1000 Flat Ribbon Cable (IP40/Connector Entry Direction Adjustable) Dimensions: Series JJ5SY1-10 Stations (Connector entry upward direction) One-touch ﬁ tting [4(A), 2(B) port] Station 1 Station n 18.8 Applicable tubing O.D. C6: Ø 6 (SMC) (21) One-touch ﬁ...
Page 35 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported JSY3000 Flat Ribbon Cable (IP40/Connector Entry Direction Adjustable) Dimensions: Series JJ5SY3-10 Stations Manifold block internal wiring speciﬁ cations —: Double wiring S : Single wiring (Connector entry upward direction) Station 1 Station n (18.8) (17.4)
Page 36 JSY1000/3000/5000 Series Side Type Ported JSY5000 Flat Ribbon Cable (IP40/Connector Entry Direction Adjustable) Dimensions: Series JJ5SY5-10 Stations Manifold block internal wiring speciﬁ cations —: Double wiring S : Single wiring Station 1 Station n (Connector entry upward direction) 18.8 One-touch ﬁ tting (23.3) [1(P), 3/5(E) port] Pitch...
Page 37 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported (Applicable to Ø 2 and Ø 4 ﬁ ttings) JSY1000 Flat Ribbon Cable (IP20/Compact Type) Dimensions: Series JJ5SY1-10 Stations One-touch ﬁ tting (9.3) [4(A), 2(B) port] (Connector entry upward direction) Applicable tubing O.D. C2: Ø 2 (SMC) Station 1 Station n C4: Ø...
Page 38 JSY1000/3000/5000 Series Side Type Ported (Applicable to Ø 6 ﬁ ttings) JSY1000 Flat Ribbon Cable (IP20/Compact Type) Dimensions: Series JJ5SY1-10 Stations (9.3) One-touch ﬁ tting [4(A), 2(B) port] (Connector entry upward direction) Station 1 Station n Applicable tubing O.D. C6: Ø 6 (SMC) 23.7 (21) One-touch ﬁ...
Page 39 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported JSY3000 Flat Ribbon Cable (IP20/Compact Type) Dimensions: Series JJ5SY3-10 Stations Manifold block internal wiring speciﬁ cations (9.3) —: Double wiring Station 1 Station n S : Single wiring (Connector entry upward direction) 23.7 One-touch ﬁ...
Page 40 JSY1000/3000/5000 Series Electrical Wiring Speciﬁ cations Connector Cable [IP20/IP40] D-sub connector GVVZS3000-21A- D-sub connector cable If alignment is not speciﬁ ed, the internal wiring is double Cable wiring (connected to SOL. a and SOL. b) regardless of Assembly part no. Note length (L) number of stations, valve and option types.
Page 41 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Electrical Wiring Speciﬁ cations Flat ribbon cable connector If alignment is not speciﬁ ed, the internal wiring will be double wiring (connected to SOL. a and SOL. b) regardless of number of stations, valve types, and option types. Connector terminal no.
Page 42 JSY1000/3000/5000 Series Flat Ribbon Cable Connector AXT100-FC Terminal no. 28AWG (15.6) Flat ribbon cable connector Assembly part no. Cable Connector Manufacturer’s Example length ( 26 pins 20 pins 10 pins • HIROSE ELECTRIC CO., LTD. 1.5 m AXT100-FC26-1 AXT100-FC20-1 AXT100-FC10-1 •...
Page 44 Connector Connecting Base Plug-in Spring Type Terminal Block Box Terminal Block Box Type 10 JSY1000/3000/5000 Series Side Ported Internal Pilot How to Order Manifolds JJ5SY 3 10 TC 05 D Made to Order (Refer to page 135 for details.) Speciﬁ cation External pilot (SUP/EXH block assembly) Series Type...
Page 45 Refer to page 116 for base gasket and ing circuit (continuous duty type) mounting screw part numbers. specification. Refer to “Made to Order” on page 135. For the JSY1000 series, only the power-saving circuit specification Protective class is available. ( Mark:...
Page 46 JSY1000/3000/5000 Series Side Type Ported (Applicable to Ø 2 and Ø 4 ﬁ ttings) JSY1000 Spring Type Terminal Block Box Dimensions: Series JJ5SY1-10TC Stations One-touch ﬁ tting One-touch ﬁ tting [1(P), 3/5(E) port] [4(A), 2(B) port] Applicable tubing O.D.: Ø 8 (SMC) Applicable tubing O.D.
Page 47 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported (Applicable to Ø 6 ﬁ ttings) JSY1000 Spring Type Terminal Block Box Dimensions: Series JJ5SY1-10TC Stations One-touch ﬁ tting [1(P), 3/5(E) port] One-touch ﬁ tting Applicable tubing O.D.: Ø 8 (SMC) [4(A), 2(B) port] Station 1 Station n...
Page 48 JSY1000/3000/5000 Series Side Type Ported JSY3000 Spring Type Terminal Block Box Dimensions: Series JJ5SY3-10TC Stations Station 1 Station n One-touch ﬁ tting Manifold block internal wiring speciﬁ cations [1(P), 3/5(E) port] —: Double wiring Applicable tubing O.D.: Ø 10 (SMC) S : Single wiring (17.4) 2 x M20 x 1.5 thread depth 13...
Page 49 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported JSY5000 Spring Type Terminal Block Box Dimensions: Series JJ5SY5-10TC Stations Station 1 Station n One-touch ﬁ tting Manifold block internal wiring speciﬁ cations [1(P), 3/5(E) port] —: Double wiring Applicable tubing O.D.: Ø 12 (SMC) S : Single wiring (23.3) 2 x M20 x 1.5 thread depth 13...
Page 50 JSY1000/3000/5000 Series Side Type Ported (Applicable to Ø 2 and Ø 4 ﬁ ttings) JSY1000 Terminal Block Box Dimensions: Series JJ5SY1-10T Stations One-touch ﬁ tting [1(P), 3/5(E) port] One-touch ﬁ tting Applicable tubing O.D.: Ø 8 (SMC) [4(A), 2(B) port] Applicable tubing O.D.
Page 51 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported (Applicable to Ø 6 ﬁ ttings) JSY1000 Terminal Block Box Dimensions: Series JJ5SY1-10T Stations One-touch ﬁ tting [1(P), 3/5(E) port] One-touch ﬁ tting Applicable tubing O.D.: Ø 8 (SMC) [4(A), 2(B) port] Applicable tubing O.D.
Page 52 JSY1000/3000/5000 Series Side Type Ported JSY3000 Terminal Block Box Dimensions: Series JJ5SY3-10T Stations One-touch ﬁ tting Station 1 Station n [1(P), 3/5(E) port] Manifold block internal wiring speciﬁ cations Applicable tubing O.D.: Ø 10 (SMC) —: Double wiring S : Single wiring (17.4) 2 x G3/4 Pitch...
Page 53 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported JSY5000 Terminal Block Box Dimensions: Series JJ5SY5-10T Stations Station 1 Station n One-touch ﬁ tting Manifold block internal wiring speciﬁ cations [1(P), 3/5(E) port] —: Double wiring Applicable tubing O.D.: Ø 12 (SMC) S : Single wiring (23.3) 2 x G3/4...
Page 54 JSY1000/3000/5000 Series Spring Type Terminal Block “TC” Connection Step 1. Remove the terminal block cover. Step 2. The diagram below shows the terminal block wiring. Loosen the 4 mounting screws (M3) to remove All stations are provided with double wiring the terminal block cover.
Page 55 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Terminal Block “T” Connection Step 1. Remove the terminal block cover. Step 2. The diagram below shows the terminal block wiring. Loosen the 4 mounting screws (M4) to remove All stations are provided with double wiring the terminal block cover.
Page 56 Connector Connecting Base Plug-in Lead Wire Type 10 JSY1000/3000/5000 Series Side Ported Internal Pilot How to Order Manifolds JJ5SY 3 10 L1 1 05 U Made to Order (Refer to page 135 for details.) Speciﬁ cation External pilot (SUP/EXH block assembly) Series Type Valve stations...
Page 57 ∗ Only “Z” and “NZ” types are available for the Caution base gasket is not included. JSY1000 series. ∗ When the non-polar common speciﬁ cation Since the base gasket is attached to the If the JSY 3 0 0 0 / 5 0 0 0 series is to...
Page 58 JSY1000/3000/5000 Series Side Type Ported (Applicable to Ø 2 and Ø 4 ﬁ ttings) JSY1000 Lead Wire Dimensions: Series JJ5SY1-10L Stations One-touch ﬁ tting [4(A), 2(B) port] Applicable tubing O.D. C2: Ø 2 (SMC) One-touch ﬁ tting C4: Ø 4 (SMC) [1(P), 3/5(E) port] Station 1 Station n...
Page 59 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported (Applicable to Ø 6 ﬁ ttings) JSY1000 Lead Wire Dimensions: Series JJ5SY1-10L Stations One-touch ﬁ tting One-touch ﬁ tting [4(A), 2(B) port] [1(P), 3/5(E) port] Applicable tubing O.D. C6: Ø 6 (SMC) Station 1 Station n Applicable tubing O.D.: Ø...
Page 60 JSY1000/3000/5000 Series Side Type Ported JSY3000 Lead Wire Dimensions: Series JJ5SY3-10L Stations Manifold block internal wiring speciﬁ cations —: Double wiring S : Single wiring One-touch ﬁ tting Station 1 Station n [1(P), 3/5(E) port] Applicable tubing O.D.: Ø 10 (SMC) (17.4) Pitch One-touch ﬁ...
Page 61 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported JSY5000 Lead Wire Dimensions: Series JJ5SY5-10L Stations Manifold block internal wiring speciﬁ cations —: Double wiring Station 1 Station n S : Single wiring One-touch ﬁ tting [1(P), 3/5(E) port] Applicable tubing O.D.: Ø 12 (SMC) (23.3) Pitch 59.2...
Page 62 JSY1000/3000/5000 Series Electrical Wiring Speciﬁ cations Lead wire Electrical characteristics Item Property Conductor resistance 143 or less 34 cores 34 cores Lead wire Ω/km, 20 °C AWG26 (0.14 mm ) x 34 cores Voltage limit 2000 V, 1 minute, AC If alignment is not speciﬁ...
Page 63 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Electrical Wiring Speciﬁ cations Lead wire Electrical characteristics Item Property Conductor resistance 143 or less Lead wire Ω/km, 20 °C 17 cores 17 cores 9 cores Lead wire AWG26 (0.14 mm ) x 17 cores AWG26 (0.14 mm ) x 9 cores Voltage limit...
Page 64 Connector Connecting Base Plug-in EX600 Type 10 JSY1000/3000/5000 Series Side Ported Internal Pilot How to Order Manifolds JJ5SY 3 10 S6 Q 2 2 05 U C6 Made to Order (Refer to page 135 for details.) e r t Speciﬁ cation External pilot (SUP/EXH block assembly) Series SI unit output polarity,...
Page 65 For details, refer to page 138. ing circuit (continuous duty type) specification. Refer to “Made to Order” on page 135. For the JSY1000 series, only the power-saving circuit specification Protective class is available. ( Mark:...
Page 66 JSY1000/3000/5000 Series Side Type Ported (Applicable to Ø 2 and Ø 4 ﬁ ttings) JSY1000 EX600 (M12 Connector) Dimensions: Series JJ5SY1-10S6 Stations One-touch ﬁ tting [4(A), 2(B) port] Applicable tubing O.D. C2: Ø 2 (SMC) Station 1 Station n C4: Ø 4 (SMC) (21) One-touch ﬁ...
Page 67 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported (Applicable to Ø 6 ﬁ ttings) JSY1000 EX600 (M12 Connector) Dimensions: Series JJ5SY1-10S6 Stations One-touch ﬁ tting [4(A), 2(B) port] Station 1 Station n Applicable tubing O.D. C6: Ø 6 (SMC) (21) One-touch ﬁ...
Page 68 JSY1000/3000/5000 Series Side Type Ported (Applicable to Ø 2 and Ø 4 ﬁ ttings) JSY1000 EX600 (7/8 Inch Connector) Dimensions: Series JJ5SY1-10S6 Stations One-touch ﬁ tting [4(A), 2(B) port] Applicable tubing O.D. C2: Ø 2 (SMC) Station 1 Station n C4: Ø...
Page 69 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported (Applicable to Ø 6 ﬁ ttings) JSY1000 EX600 (7/8 Inch Connector) Dimensions: Series JJ5SY1-10S6 Stations One-touch ﬁ tting [4(A), 2(B) port] Station 1 Station n Applicable tubing O.D. C6: Ø 6 (SMC) (21) One-touch ﬁ...
Page 70 JSY1000/3000/5000 Series Side Type Ported JSY3000 EX600 (M12 Connector) Dimensions: Series JJ5SY3-10S6 Stations One-touch ﬁ tting Manifold block internal wiring speciﬁ cations [4(A), 2(B) port] —: Double wiring Applicable tubing O.D. C6: Ø 6 (SMC) Station 1 Station n S : Single wiring C8: Ø...
Page 71 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported JSY3000 EX600 (7/8 Inch Connector) Dimensions: Series JJ5SY3-10S6 Stations One-touch ﬁ tting Manifold block internal wiring speciﬁ cations [4(A), 2(B) port] —: Double wiring Station 1 Station n Applicable tubing O.D. C6: Ø 6 (SMC) S : Single wiring C8: Ø...
Page 72 JSY1000/3000/5000 Series Side Type Ported JSY5000 EX600 (M12 Connector) Dimensions: Series JJ5SY5-10S6 Stations Station 1 Station n Manifold block internal wiring speciﬁ cations One-touch ﬁ tting —: Double wiring [1(P), 3/5(E) port] S : Single wiring Applicable tubing O.D.: Ø 12 (SMC) Pitch 22.7 18 P=16...
Page 73 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported JSY5000 EX600 (7/8 Inch Connector) Dimensions: Series JJ5SY5-10S6 Stations Station 1 Station n One-touch ﬁ tting Manifold block internal wiring speciﬁ cations [1(P), 3/5(E) port] —: Double wiring S : Single wiring Applicable tubing O.D.: Ø...
Page 74 Connector Connecting Base Plug-in EX245 JSY3000/5000 Type 10/ Series Side Ported How to Order Manifolds JJ5SY 3 10 S AAN 05 D Only direct mounting is selectable for the manifold. y u i Made to Order (Refer to page 135 for details.) Speciﬁ...
Page 75 JSY3000/5000 Series Connector Connecting Base Plug-in How to Order Manifold Assembly Example (JJ5SY3-10SAAN - ) JJ5SY3-10SAANY2-05D-C6 ··· 1 set (Type 10 5-station manifold base part no.) 2-position double ∗ JSY3100-5U ······················· 3 sets (2-position single part no.) JSY3200-5U (2 sets) ∗...
Page 76 JSY3000/5000 Series 10/Side Type Ported JSY3000 EX245 Dimensions: Series JJ5SY3-10SA - Stations Station 1 Station n FE terminal (M4) Manifold block internal wiring speciﬁ cations —: Double wiring S : Single wiring One-touch ﬁ tting 18.3 15.8 Pitch (17.4) [1(P), 3/5(E) port] P = 11.5 One-touch ﬁ...
Page 77 JSY3000/5000 Series Connector Connecting Base Plug-in 10/Side Type Ported JSY5000 EX245 Dimensions: Series JJ5SY5-10SA - Stations Station 1 Station n Manifold block internal wiring speciﬁ cations FE terminal (M4) —: Double wiring S : Single wiring One-touch ﬁ tting Pitch 22.7 18 (23.3) [1(P), 3/5(E) port]...
Page 78 Connector Connecting Base Plug-in EX250 Type 10 JSY1000/3000/5000 Series Side Ported Internal Pilot How to Order Manifolds JJ5SY 3 10 S Q 1 A 05 U C6 Made to Order (Refer to page 135 for details.) e r t Speciﬁ cation External pilot (SUP/EXH block assembly) Series Type...
Page 79 ∗ Only “Z” and “NZ” types are available for the manifold, please order the base gasket If the JSY 3 0 0 0 / 5 0 0 0 series is to JSY1000 series. separately if it is needed for maintenance. ∗ When the non-polar common speciﬁ cation...
Page 80 JSY1000/3000/5000 Series Side Type Ported (Applicable to Ø 2 and Ø 4 ﬁ ttings) ngs) JSY1000 EX250 Dimensions: Series JJ5SY1-10S Stations One-touch ﬁ tting [4(A), 2(B) port] Applicable tubing O.D. C2: Ø 2 (SMC) C4: Ø 4 (SMC) One-touch ﬁ tting [1(P), 3/5(E) port] Station 1 Station n...
Page 81 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported (Applicable to Ø 6 ﬁ ttings) JSY1000 EX250 Dimensions: Series JJ5SY1-10S Stations One-touch ﬁ tting One-touch ﬁ tting [1(P), 3/5(E) port] [4(A), 2(B) port] Station 1 Station n Applicable tubing O.D.: Ø 8 (SMC) Applicable tubing O.D.
Page 82 JSY1000/3000/5000 Series Side Type Ported JSY3000 EX250 Dimensions: Series JJ5SY3-10S Stations Manifold block internal wiring speciﬁ cations —: Double wiring S : Single wiring One-touch ﬁ tting Station 1 Station n [1(P), 3/5(E) port] Applicable tubing O.D.: Ø 10 (SMC) (17.4) Pitch One-touch ﬁ...
Page 83 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported JSY5000 EX250 Dimensions: Series JJ5SY5-10S Stations Station 1 Station n Manifold block internal wiring speciﬁ cations —: Double wiring One-touch ﬁ tting S : Single wiring [1(P), 3/5(E) port] Applicable tubing O.D.: Ø 12 (SMC) (23.3) Pitch 4 x M8...
Page 84 Connector Connecting Base Plug-in EX260 Type 10 JSY1000/3000/5000 Series Side Ported Refer to page 8 5 for details on manifolds that support safety communication (PROFIsafe). Internal Pilot How to Order Manifolds JJ5SY 3 10 S QA 05 D Made to Order (Refer to page 135 for details.) r t y Speciﬁ...
Page 85 Refer to “Made surge voltage. For details, refer to page 138. to Order” on page 135. For the JSY1000 series, only the power-saving circuit specification Protective class is available. ( Mark:...
Page 86 Connector Connecting Base Plug-in EX260 Safety Communication Protocol (PROFIsafe) Type 10 JSY1000/3000/5000 Series Side Ported Using the safety communication protocol Refer to the EX260 Web Catalogue for details on units that support the safety communication protocol. When using a manifold valve within an ISO 13849-compliant safety system, the device needs to be considered from both the pneumatic circuit and the electric side.
Page 87 For details, refer to page 138. be continuously energised, please be sure to select the power- saving circuit (continuous duty type) specification. Refer to “Made to Order” on page 135. For the JSY1000 series, only the power-saving circuit specification is available.
Page 88 JSY1000/3000/5000 Series Side Type Ported (Applicable to Ø 2 and Ø 4 ﬁ ttings) JSY1000 EX260 Dimensions: Series JJ5SY1-10S Stations One-touch ﬁ tting [Communication connector D-sub] [4(A), 2(B) port] Applicable tubing O.D. C2: Ø 2 (SMC) Station 1 Station n C4: Ø...
Page 89 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported (Applicable to Ø 6 ﬁ ttings) JSY1000 EX260 Dimensions: Series JJ5SY1-10S Stations [Communication connector D-sub] One-touch ﬁ tting [4(A), 2(B) port] Station 1 Station n Applicable tubing O.D. C6: Ø 6 (SMC) BUS OUT BUS IN (21)
Page 90 JSY1000/3000/5000 Series Side Type Ported JSY3000 EX260 Dimensions: Series JJ5SY3-10S Stations Manifold block internal wiring speciﬁ cations [Communication connector D-sub] —: Double wiring S : Single wiring Station 1 Station n BUS OUT BUS IN (17.4) 46.4 Pitch One-touch ﬁ tting P = 11.5 [4(A), 2(B) port] One-touch ﬁ...
Page 91 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported JSY5000 EX260 Dimensions: Series JJ5SY5-10S Stations Manifold block internal wiring speciﬁ cations [Communication connector D-sub] —: Double wiring Station 1 Station n S : Single wiring BUS OUT BUS IN (23.3) 50.9 Pitch One-touch ﬁ...
Page 92 Connector Connecting Base Plug-in EX120 Type 10 JSY1000/3000/5000 Series Side Ported Internal Pilot How to Order Manifolds JJ5SY 3 10 S3 Q 05 D Made to Order (Refer to page 135 for details.) Speciﬁ cation External pilot (SUP/EXH block assembly) Series Type Valve stations...
Page 93 Refer to “Made surge voltage. For details, refer to page 138. to Order” on page 135. For the JSY1000 series, only the power-saving circuit specification Protective class is available. ( Mark:...
Page 94 JSY1000/3000/5000 Series Side Type Ported (Applicable to Ø 2 and Ø 4 ﬁ ttings) JSY1000 EX120 Dimensions: Series JJ5SY1-10S3 Stations One-touch ﬁ tting [4(A), 2(B) port] Applicable tubing O.D. C2: Ø 2 (SMC) Station 1 Station n C4: Ø 4 (SMC) (21) Pitch One-touch ﬁ...
Page 95 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported (Applicable to Ø 6 ﬁ ttings) JSY1000 EX120 Dimensions: Series JJ5SY1-10S3 Stations One-touch ﬁ tting [4(A), 2(B) port] Station 1 Station n Applicable tubing O.D. C6: Ø 6 (SMC) (21) One-touch ﬁ tting Pitch [1(P), 3/5(E) port] Manifold block internal wiring speciﬁ...
Page 96 JSY1000/3000/5000 Series Side Type Ported JSY3000 EX120 Dimensions: Series JJ5SY3-10S3 Stations Manifold block internal wiring speciﬁ cations —: Double wiring Station 1 Station n S : Single wiring (17.4) Pitch One-touch ﬁ tting One-touch ﬁ tting P = 11.5 [1(P), 3/5(E) port] [4(A), 2(B) port] 51.5 15.8...
Page 97 JSY1000/3000/5000 Series Connector Connecting Base Plug-in Side Type Ported JSY5000 EX120 Dimensions: Series JJ5SY5-10S3 Stations Station 1 Station n Manifold block internal wiring speciﬁ cations —: Double wiring S : Single wiring (23.3) Pitch One-touch ﬁ tting One-touch ﬁ tting P = 16 [1(P), 3/5(E) port] [4(A), 2(B) port]...
Page 98 JSY1000/3000/5000 Series Common Dimensions Side Type Ported JSY1000 External Pilot, Built-in Silencer Dimensions: Series JJ5SY1-10 S, R Stations One-touch ﬁ tting (Fitting for the type with [PE: Pilot EXH port] Station 1 Station n P/E ports on the U and/or D sides) [X: External pilot port] Applicable tubing O.D.: Ø...
Page 99 JSY1000/3000/5000 Series Common Dimensions Side Type Ported JSY3000 External Pilot, Built-in Silencer Dimensions: Series JJ5SY3-10 S, R Stations One-touch ﬁ tting (Fitting for the type with [PE: Pilot EXH port] Station 1 Station n P/E ports on the U and/or D sides) [X: External pilot port] Applicable tubing O.D.: Ø...
Page 100 JSY1000/3000/5000 Series Side Type Ported JSY5000 External Pilot, Built-in Silencer Dimensions: Series JJ5SY5-10 S, R Stations One-touch ﬁ tting (Fitting for the type with [PE: Pilot EXH port] Station 1 Station n P/E ports on the U and/or D sides) [X: External pilot port] Applicable tubing O.D.: Ø...
Page 101 JSY1000/3000/5000 Series Common Dimensions Side Type Ported JSY1000 Mixed Size, Straight Port Type Dimensions: Series JJ5SY1-10 - Stations One-touch ﬁ tting Station 1 Station n One-touch ﬁ tting [4(A), 2(B) port] [4(A), 2(B) port] Applicable tubing O.D. C2: Ø 2 (SMC) Applicable tubing O.D.: Ø...
Page 102 Type JSY1000/3000/5000 Series Connector Connecting Base Manifold Exploded View Manifold exploded view p. 112 U side SUP blocking disk EXH blocking disk ∗ The ﬁ gures show the JSY3000 series. D side Wiring D-sub Connector/Flat Ribbon Cable D-sub Connector (IP67) D-sub Connector/ (IP40/Connector Entry Direction (For JSY3000/5000)
Page 103 Type JSY1000/3000/5000 Series Connector Connecting Base Manifold Exploded View Wiring D-sub Connector/Flat Ribbon Cable (IP40/Connector Entry Direction Adjustable) Manifold exploded view U side Locking bracket (For D-sub connector) SUP blocking disk Cover Silencer cover Port block Refer to page 114. Tension bolt DIN rail holding screw (Tightening torque: 1.4 N·m)
Page 104 JSY3000/5000 Series Wiring D-sub Connector (IP67) Manifold exploded view U side (For JSY3000/5000) DIN rail holding screw (Tightening torque: 1.4 N·m) SUP blocking disk Tension bolt EXH blocking disk Mounting screw (Tightening torque: 1.4 N·m) Holding screw D side (Tightening torque: 1.4 N·m) Refer to pages 115 to 117 for Clamp bracket It is mounted only for the DIN rail mounting type.
Page 105 Type JSY1000/3000 Series Connector Connecting Base Manifold Exploded View Wiring D-sub Connector/Flat Ribbon Cable (IP20/Compact Type) Manifold exploded view U side (For JSY1000/3000) Locking bracket (For D-sub connector) SUP blocking disk Cover Silencer cover Port block Refer to page 114. Tension bolt DIN rail holding screw (Tightening torque: 1.4 N·m)
Page 106 JSY1000/3000/5000 Series Wiring Spring Type Terminal Block Box Manifold exploded view U side DIN rail holding screw (Tightening torque: 1.4 N·m) SUP blocking disk Tension bolt EXH blocking disk Holding screw D side (Tightening torque: 1.4 N·m) Refer to pages 115 to 117 for details on common parts.
Page 107 Type JSY1000/3000/5000 Series Connector Connecting Base Manifold Exploded View Wiring Terminal Block Box Manifold exploded view U side DIN rail holding screw (Tightening torque: 1.4 N·m) Mounting screw (Tightening torque: 0.8N·m) SUP blocking disk Tension bolt EXH blocking disk Holding screw D side Mounting screw for connecting parts (Tightening torque: 1.4 N·m)
Page 108 JSY1000/3000/5000 Series Wiring Lead Wire Manifold exploded view U side DIN rail holding screw (Tightening torque: 1.4 N·m) SUP blocking disk Tension bolt EXH blocking disk Mounting screw (Tightening torque: 0.8 N·m) Holding screw D side (Tightening torque: 1.4 N·m) Refer to pages 115 to 117 for details on common parts.
Page 109 Type JSY1000/3000/5000 Series Connector Connecting Base Manifold Exploded View Wiring EX600 Manifold exploded view U side DIN rail holding screw (Tightening torque: 1.4 N·m) Mounting screw (Tightening torque: 0.8 N·m) SUP blocking disk Tension bolt EXH blocking disk D side Holding screw Refer to pages 115 to 117 for (Tightening torque: 1.4 N·m)
Page 110 JSY1000/3000/5000 Series Manifold Parts Nos. t EX600 digital input unit EX600 DX P B Input type Number of inputs, open-circuit detection, and connector Symbol Description Symbol Number of inputs Open-circuit detection Connector M12 connector (5 pins) 4 pcs. M8 connector (3 pins) 8 pcs. M8 connector (3 pins) 8 pcs.
Page 111 Type JSY1000/3000/5000 Series Connector Connecting Base Manifold Exploded View Wiring EX245 Joint assembly M3 hexagon socket head cap screw Tightening torque: (0.75 to 0.85) N·m Manifold exploded view U side Joint assembly SUP blocking disk M4 hexagon socket head cap screw Tightening torque: (1.2 to 1.4) N·m Modular adapter assembly Tension bolt...
Page 112 JSY3000/5000 Series Manifold Parts Nos. e EX245 digital input module EX245 DX1 Digital input module speciﬁ cation Digital input (16 inputs) e EX245 digital output module EX245 DY1 Digital output module speciﬁ cation Digital output (8 outputs) r EX245 end plate EX245 EA2 3 Bracket For JSY/SY...
Page 113 Type JSY3000/5000 Series Connector Connecting Base Manifold Exploded View Wiring EX250 Manifold exploded view U side DIN rail holding screw (Tightening torque: 1.4 N·m) SUP blocking disk Tension bolt EXH blocking disk Holding screw (Tightening torque: 1.4 N·m) D side Clamp bracket assembly It is mounted only for the DIN rail Refer to pages 115 to 117 for...
Page 114 JSY1000/3000/5000 Series Wiring EX260 Manifold exploded view U side DIN rail holding screw (Tightening torque: 1.4 N·m) SUP blocking disk Tension bolt Holding screw EXH blocking disk (Tightening torque: 1.4 N·m) Clamp bracket It is mounted only for the DIN rail mounting type. D side The holding screw of the clamp bracket is tightened at two points.
Page 115 Type JSY1000/3000/5000 Series Connector Connecting Base Manifold Exploded View Wiring EX120 Manifold exploded view U side DIN rail holding screw (Tightening torque: 1.4 N·m) SUP blocking disk Tension bolt EXH blocking disk D side Holding screw (Tightening torque: 1.4 N·m) Refer to pages 115 to 117 for details on common parts.
Page 116 JSY1000/3000/5000 Series Manifold Exploded View [Common Parts] Caution SUP/EXH end block Valve mounting screw assembly (Includes a) (2 pcs.) Tightening torque for valve mounting screw Details: p. 117 M1.4: 0.06 N·m (JSY1000) M2: 0.16 N·m (JSY3000) DIN rail holding screw M3: 0.8 N·m (JSY5000) (Tightening torque: 1.4 N·m) ∗...
Page 117 Connector gasket ∗ 1 pc. Ø 10 One-touch ﬁ tting — — e Manifold block gasket 1 pc. Ø 12 One-touch ﬁ tting — — r Tie-rod for additional stations 3 pcs. ∗1 Not applicable to the JSY1000 series...
Page 118 ∗ The part number is for 1 piece. ∗ Part number of the JSY1000 is different depending on the manifold wiring. Tension bolt Refer to the Table 1. JSY1000 series DIN rail mounting for selecting a (Tightening torque: clamp bracket. 0.8 N·m 3 pcs.)
Page 120 Connector Connecting Base Plug-in Vacuum Unit ZK2 Combination Manifold RoHS Type 10 JSY3000 Series Side Ported Specify the valve manifold and mounted valve part numbers as well as the ejector manifold How to Order and mounted ejector part numbers for ordering. Refer to page 120 for an order example. How to Order Internal Pilot How to Order Manifolds...
Page 121 Connector Connecting Base Plug-in JSY3000 Series Vacuum Unit ZK2 Combination Manifold Specify the valve manifold and mounted valve part numbers as well as the ejector manifold and mounted ejector part numbers for ordering. Refer to the bottom of this page for an order example. Internal Pilot How to Order Valves (With mounting screw) Refer to page 13 for valve speciﬁ...
Page 122 JSY3000 Series Specify the valve manifold and mounted valve part numbers as well as the ejector manifold and mounted ejector part numbers for ordering. Refer to page 120 for an order example. How to Order Manifolds ∗ ZZK2 04 A A 1 S0 Ejector Manifold w e r Symbol for the assembly...
Page 123 Connector Connecting Base Plug-in JSY3000 Series Vacuum Unit ZK2 Combination Manifold Specify the valve manifold and mounted valve part numbers as well as the ejector manifold For ejector speciﬁ cations, refer to the and mounted ejector part numbers for ordering. Refer to page 120 for an order example. ZK2 A series in the Web Catalogue.
Page 124 JSY3000 Series Side Type Ported JSY3000 Vacuum Unit ZK2 Combination Manifold Dimensions: Series For details on ejectors, refer to the ZK2 A series in the Web Catalogue. JJ5SY3-10 - Stations One-touch fitting ∗ ZZK2 Stations [Common supply (PV) port] Applicable tubing O.D.: Ø 8 (SMC) ∗...
Page 125 Connector Connecting Base Plug-in JSY3000 Series Vacuum Unit ZK2 Combination Manifold Dimensions For details on ejectors, refer to the ZK2 A series in the Web Catalogue. With pressure sensor With pressure switch Pressure switch for vacuum 57.6 (2000: Lead wire length) (30) Pressure sensor...
Page 126 JSY3000 Series Side Type Ported External Pilot, Built-in Silencer JSY3000 Vacuum Unit ZK2 Combination Manifold Dimensions: Series JJ5SY3-10 - S, R Stations ∗ ZZK2 Stations One-touch fitting [PE: Pilot EXH port] (For P/E ports on the U side or both sides) [X: External pilot port] Applicable tubing O.D.: ø4 (SMC) (Station 1)
Page 127 JSY3000 Series ZK2 Combination Manifold Exploded View Manifold Exploded View Tension bolt (Short) (Tightening torque: 0.8 N·m) End block assembly (Includes a and b) Details: p. 127 Intermediate SUP/EXH block assembly (For P/E ports on the U side or both sides) Details: p.
Page 128 JSY3000 Series Manifold Parts Nos. End block assembly JSY31M End block assembly (Includes a and b) Tension bolt (Short) (Tightening torque: 0.8 N·m) Tension bolt (Long) (Tightening torque: 0.8 N·m) End block assembly accessories and the number of accessories Accessories Quantity Connection bracket assembly 1 pc.
Page 129 JSY3000 Series ZK2 A Vacuum Ejector Manifold Exploded View How to Increase Manifold Stations [To increase the number of stations from an odd Tension bolt number (1, 3, 5, 7) to an even number (2, 4, 6, 8)] End plate U (Odd numbered stations have a vacant lead wire for one Valve assembly station, so additional orders are not required.)
Page 130 JSY3000 Series How to Increase Manifold Stations: Vacuum Ejector Manifold for JSY3000 Connect the lead wire assembly to the positions shown in the diagram below. Caution 1) After inserting each pin, confirm that the pin is locked by lightly pulling the lead wire. 2) Do not pull the lead wire forcefully when connecting.
Page 131 JSY1000/3000/5000 Series Clip One-touch Fittings, Plug, Clip, Port Plate, Tube Releasing Tool Plug Refer to “How to Replace One-touch Fittings” on page 139 Port plate for the replacement method. One-touch ﬁ tting (A, B port) Port plate One-touch ﬁ tting (P, E port) q One-touch Fittings Series...
Page 132 JSY1000/3000/5000 Series Manifold Options DIN rail dimensions/weight for the JSY1000/3000 connector connecting base Plug-in VZ1000-11-1- ∗ After conﬁ rming the L3 dimension in the dimensions table of each series, refer to the DIN rail dimensions table below and specify the number in the box (7.5) Rail mounting hole pitch 12.5 110.5...
Page 133 JSY1000/3000/5000 Series Manifold Options Caution Tightening torque for mounting screw M1.4: 0.06 N·m (JSY1000) M2: 0.16 N·m (JSY3000) Manifold Options ∗ Refer to page 134 for dimensions. M3: 0.8 N·m (JSY5000) Blanking plate [With two mounting screws] JSY 3 1M 26P 1A Used when valve additions are expected or for maintenance Series Mounting screw...
Page 134 JSY1000/3000/5000 Series Manifold Options SUP/EXH blocking disk [SUP blocking disk] Inserting an SUP blocking disk in the pressure supply passage of a manifold valve can allow for the use of 2 different pressures (high and low) in 1 manifold. [EXH blocking disk] Series SUP blocking disk EXH blocking disk...
Page 135 JSY1000/3000/5000 Series Manifold Options Dimensions: Manifold Options Blanking plate JSY1000 JSY3000 JSY5000 series series series Blanking plate Blanking plate Blanking plate Individual SUP/EXH spacer JSY1000 JSY3000 JSY5000 series series series One-touch ﬁ tting One-touch ﬁ tting (SUP, EXH port) Applicable tubing O.D.: Ø 12 (SUP, EXH port) One-touch ﬁ...
Page 136 JSY1000/3000/5000 Series Made to Order Please contact SMC for detailed dimensions, speciﬁ cations, and delivery times. External pilot How to Order Manifolds Refer to the How to Order manifolds for each type. For D-sub Connector/Flat Ribbon Cable/Lead Wire JJ5SY For Terminal Block Box JJ5SY For EX260/EX245/EX120 JJ5SY...
Page 137 JSY1000/3000/5000 Series Speciﬁ c Product Precautions 1 Be sure to read this before handling the products. Refer to the back cover for safety instructions. For 3/4/5-port solenoid valve precautions, refer to the “Handling Precautions for SMC Products” and the “Operation Manual” on the SMC website: https://www.smc.eu Environment Manual Override Warning...
Page 138 JSY1000/3000/5000 Series Speciﬁ c Product Precautions 2 Be sure to read this before handling the products. Refer to the back cover for safety instructions. For 3/4/5-port solenoid valve precautions, refer to the “Handling Precautions for SMC Products” and the “Operation Manual” on the SMC website: https://www.smc.eu Light/Surge Voltage Suppressor Caution í...
Page 139 JSY1000/3000/5000 Series Speciﬁ c Product Precautions 3 Be sure to read this before handling the products. Refer to the back cover for safety instructions. For 3/4/5-port solenoid valve precautions, refer to the “Handling Precautions for SMC Products” and the “Operation Manual” on the SMC website: https://www.smc.eu Countermeasure for Surge Voltage Intrusion Light Indication Caution...
Page 140 ∗ In order to replace C2 or C4 with C6 marked with S F R E D-cut surface for the JSY1000 series, the manifold Moves from side to side block assembly needs to be replaced. Please select the manifold block assembly on page 116.
Page 141 Caution Caution 1. When using other than SMC brand tube, conﬁ rm The clamp bracket ﬁ xing method for the JSY1000 series is that the following speciﬁ cations are satisﬁ ed with different depending on wiring. respect to the tube outside diameter tolerance.
Page 142 Model Index (Alphanumeric Order) p. 21 JJ5SY1-10F JSY1000 Type 10/Side Ported Plug-in Connector Connecting Base: D-sub Connector, Connector Entry Direction Adjustable <IP40> p. 21 JJ5SY1-10FC JSY1000 Type 10/Side Ported Plug-in Connector Connecting Base: D-sub Connector, Compact Type <IP20> p. 55 JJ5SY1-10L1 JSY1000 Type 10/Side Ported...
Page 143 These safety instructions are intended to prevent hazardous situations and/or equipment Safety Instructions damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC) , and other safety regulations.
Page 144 Revision History - The EX245 integrated type (for input/output) serial Edition B transmission system has been added. - The EX260 safety communication (PROFIsafe) compliant manifold has been added. - The vacuum unit ZK2 combination manifold has been added. - Number of pages has been increased from 124 to 144. SMC Corporation (Europe) +43 (0)2262622800 www.smc.at ofﬁ...

This manual is also suitable for:

Jsy3000 series Jsy5000 series

SMC Networks JSY1000 Series Manual

Quick Links

Need help?

Questions and answers

Related Manuals for SMC Networks JSY1000 Series

Summary of Contents for SMC Networks JSY1000 Series

This manual is also suitable for: