Safety; Specified Normal Use; Usage Contrary To Intended Use - DeVilbiss AGMD Series Operating Instruction

High-performance automatic gun

2 Safety

2.1 Specified normal use

The high-performance automatic spray gun AGMD is designed for processing coatings
based on solvents or water. It must only be used to atomise materials that are explicitly
listed in the order confirmation. Use of other coating materials can only be considered if
there is no possibility of:

hazard to people or the environment

harmful effects on the spray gun
In case of doubt, please contact the manufacturer of the high-performance automatic
spray gun AGMD.
The high-performance automatic spray gun AGMD is designed for use on a fixed
location spraying system and on the hollow wrist or FLEXARM robots, on automatic
machines (hoisting devices), and on tripods.
Any usage beyond what is specified is considered improper use. The manufacturer
shall not be responsible for any resulting damages.
Caution!
Danger of injury and damage!
This device may be dangerous if it is not operated according to the specifications
in this operating instruction.
Note!
During the processing of highly corrosive or very abrasive materials, an increased
demand in spare parts can be expected. The suitability must be checked with the
material manufacturer based on the substance list.

2.2 Usage contrary to intended use

Usage is contrary to intended use if:

any media other that those specified in the operating instruction are directed
through the valves

operating conditions other than those specified in the operating instruction are
present

safety instructions are not observed during operation, assembly, and maintenance

unauthorised conversions or modifications are made to the double seat valve that
have a negative effect on safety and/or functionality
1-1-AGMD-514&515-E-002-1
AGMD
5