Installation; Usage Conditions; Tools And Other Materials Required; Fastening Onto Intermediate Plates - DeVilbiss AGMD Series Operating Instruction

High-performance automatic gun

4 Installation

The high-performance automatic spray gun AGMD is attached to a intermediate plate.
The intermediate plate in turn is fastened to an adapter.
The adapter is attached to the movement device (robot or hoisting device) or to a tripod.
All compressed air and material lines are connected to the adapter.

4.1 Usage conditions

Operating temperature, max.
Ambient temperature, max.

4.2 Tools and other materials required

The following tools are required for installing and removing the high-performance
automatic spray gun AGMD:

Workstation with vice and soft braces

Hexagon socket head wrench, size 2.5

Hexagon socket head wrench, size 3

4.3 Fastening onto intermediate plates

4.3.1

Intermediate plate AGMD-245-1

Note!
For the intermediate plate AGMD-245-1, the high-performance automatic spray
gun is fitted with the locking device AGMD-244.
As an alternative to locking device AGMD-244, the centring screw AGMD-044-3
can be used. In that case, the high-performance automatic spray gun is bolted to
the intermediate plate.
1. Lightly grease the O-rings.
2. Position the high-performance automatic
spray gun AGMD at an angle of 45°
towards the intermediate plate.
1-1-AGMD-514&515-E-002-1
AGMD
80 °C
40 °C
10