Agmd-421-Fz Paint Needle (Coated); Agmd-422 Paint Needle (Ceramic); Agmd-202-1 End Plate For Needle Stroke Setting - DeVilbiss AGMD Series Operating Instruction

High-performance automatic gun
7.3.3

AGMD-421-FZ paint needle (coated)

The coated paint needle AGMD-421-FZ was developed as an alternative to paint needle
AGMD-420 (item 10). On the basis of using UV paint it features a longer service life, and
because of its extremely smooth surface, it causes much less wear on the needle
AGMD-405-H and AGMD-405-H-C.
AGMD-421-FZ
7.3.4

AGMD-422 paint needle (ceramic)

The ceramic paint needle AGMD-422 was developed as an alternative to paint needle
AGMD-420 (item 10). It features a longer service life, and because of its extremely
smooth surface, it causes much less wear on the needle set.
The paint needle AGMD-422 can be used with nozzle AV-651-.. with a plastic insert.
The paint needles are available in sizes "AC" (for nozzle diameter 2.8 mm), "FZ" (for
nozzle diameter 1.1 – 1.6 mm) and "G" (for nozzle diameter 0.7 mm).
AGMD-422-G (for 0.7 mm)
AGMD-422-FZ (for 1.1 to 1.6 mm)
AGMD-422-AC (for 2.8 mm)
7.3.5

AGMD-202-1 end plate for needle stroke setting

The end plate AGMD-202-1 has a set
screw (item 6) with which you can
gradually adjust the needle stroke from
100% to 0%.
Install the end plate together with the
short piston AGMD-203 (item 5).
1-1-AGMD-514&515-E-002-1
AGMD
34