Designs; Technical Data; High-Performance Automatic Spray Guns Agmd-514 And Agmd-515 - DeVilbiss AGMD Series Operating Instruction

High-performance automatic gun

3 Designs

The high-performance automatic spray gun AGMD is available in different designs. They
differ in the use of a variety of components and/or in the material flow.
Note!
Gun heads marked with a "U" have two material lines, allowing coating material to
circulate through the head so a colour change can be performed while the gun is
closed.
Ordering example: AGMD-514 U FF-797c
Type of gun With circulation*
AGMD-514
* Without circulation= "U" does not apply

3.1 Technical data

3.1.1

High-performance automatic spray guns AGMD-514 and AGMD-515

Spray system:
Maximum pressures:
Switching times:
Weight:
Dimensions:
Materials:
1-1-AGMD-514&515-E-002-1
Nozzle size (see table)
U
AGMD-514 conventional air-atomisation
AGMD-515 TransTech or HVLP air-atomisation
0 to 14 bar material (MAT)
6 bar control air system (CYL)
9 bar atomiser air (ATOM) and horn air (FAN)
< 60 msec. At 5.8 bar control air system
Approx. 665 g
Refer to dimensioned sketch
Gun head:
Nozzle (standard):
Paint needle (standard):
Air distribution ring:
Air cap:
Air cap retaining ring:
Material-contacting seals:
VITON for water-based coatings
VITON EX for solvent-based coatings
Perfluorelastomer for highest resistance
AGMD
Air cap (see table)
FF
Stainless steel 1.4305
Stainless steel 1.4305
Stainless steel 1.4305
Brass, chemically nickel-plated
Brass, chemically nickel-plated
Brass, chemically nickel-plated
797c
(on request)
(standard)
(on request)
AGMD-514/515
with intermediate
plate AGMD-245-1
9