DeVilbiss AGN-502 User Manual

DeVilbiss AGN-502 User Manual

Automatic gun

Advertisement

Quick Links

EN
ISS.07
SB-E-2-660
Operation Manual
AGN-502 Automatic gun

Advertisement

Table of Contents
loading

Summary of Contents for DeVilbiss AGN-502

  • Page 1 ISS.07 SB-E-2-660 Operation Manual AGN-502 Automatic gun...
  • Page 2 Operational Description This AGN-502 Is a lightweight diaphragm operated automatic spray gun for use with ceramic glaze, vitreous enamels, liquid polishing compounds and similar materials. The standard gun fitted with a rubber diaphragm is not suitable for use with solvent based coating materials; however it can be converted for use with solvent based coating materials by fitting a PTFE protective diaphragm see Accessories.
  • Page 3: Safety Warnings

    SAFETY WARNINGS Fire and explosion Solvents and coating materials can be highly flammable or combustible when sprayed. ALWAYS refer to the coating material supplier’s instructions and COSHH sheets before using this equipment. Users must comply with all local and national codes of practice and insurance company requirements governing ventilation, fire precautions, operation and house-keeping of working areas.
  • Page 4: Specifications

    Specifications Hose connections Thread code ‘B’ ‘N’ Air supply Atomising: ¼" BSP ¼" NPS Diaphragm: 6mm push-in tube connector 6mm push-in tube connector ⅜" BSP ⅜" NPS Coating material supply: MAXIMUM RECOMMENDED WORKING PRESSURES Atomising air supply P1=7 bar (100 lbf/in2) Diaphragm air supply P3=7 bar (100 lbf/in2) Coating material supply...
  • Page 5 REF.No. DESCRIPTION PART NUMBER QTY. AIR CAP SEE CHART 1 NOZZLE SEE CHART 2 BAFFLE & SEAL JGD-402-K BAFFLE SEALS GTI-33-K5 VALVE SEAT AGN-18 DIAPHRAGM AGN-7 THUMB SCREW SSF-5711-ZN TUBE CONNECTOR 6mm AGMD-126 SCREW SSF-4272 CIRCLIP SST-8434-K5 ‘O’ RING SSG-8069-K5 SPREADER VALVE AGN-498 CONNECTOR ¼”...
  • Page 6: Installation

    Chart 2 Nozzle Order No NOZZLE ORDER NO H- HIGH GRADE STAINLESS STEEL (HARD SEAT) AV-1915-AC AV-645-AC AV-1915-D AV-645-D AV-1915-E AV-645-E AV-1915-EX AV-645-EX AV-1915-FF AV-645-FF AV-1915-FW AV-645-FW AV-1915-FX AV-645-FX AV-1915-FZ AV-645-FZ AV-1915-G AV-645-G N- NITRALLOY STEEL AV-115-AC AV-611-AC AV-115-D AV-611-D AV-115-DE AV-611-DE AV-115-EE...
  • Page 7: Operation

    Operation The AGN gun operation is different to models that have a needle valve to control the coating material flow. To shut coating material flow off, air pressure must be maintained on the diaphragm (6) to seal against seat (5). To prevent coating material leaks from the nozzle the regulated diaphragm air supply pressure ‘A’...
  • Page 8 KB-522-SS: IS SUITABLE FOR USE WITH HYDROGENATED HYDROCARBON SOLVENTS OR WATERBOURNE MATERIALS. Pressure feed tanks: A range of sizes are available manufactured in zinc coated steel or stainless steel construction. Please contact your local DEVILBISS Distributor for information Finishing Brands UK Limited, Ringwood Road,...

Table of Contents