1: Basic Screen Navigation: The Main Menu - Honeywell NOTIFIER NCA-2 Instruction Manual

Operation
1
2
3
4
5
6
7
16 lines 8
down 9
10
11
12
13
14
15
16
4.2.1 Basic Screen Navigation: The Main Menu
The main menu is a navigational screen that navigates to the selected submenu. The different options are as follows:
EVENT COUNTS DISPLAY - accesses the Event Counters screen where all events are listed by event type. (See Section 4.2.2 "Event
Counts Display" on page 39.)
MULTIPLE EVENT LIST - displays events simultaneously in groups of eight. These lists can be scrolled forward and back. (See Sec-
tion 4.2.3 "Multiple Event List" on page 40.)
HISTORY DISPLAY - navigates to the History Main Menu screen, where the user can view the history of remote nodes on the
NOTI•FIRE•NET™ system or the NCA-2 local history. (See Section 4.2.4 "Local and Node History Display" on page 41.)
READ STATUS - navigates to the Read Status Point Select screen, where you can specify a point and obtain detailed information about
it. (See Section 4.2.5 "Read Status" on page 45.)
PROGRAM/ALTER STATUS - programs the system and changes fundamental configuration settings. Examples include: change
time/date, disable/enable point, change detector sensitivity, and change point label. A password is required. (See Section 5, "Program-
ming", on page 54.)
PRINTER FUNCTIONS - prints reports of events and configurations. (See Section 4.2.7 "Printer Functions" on page 48.)
There are several NCA-2 features that require the user to specify a device address or point, such as Read Status or History Display.
• If a device does not exist at the selected address, an "INVALID POINT" error message will display for 3 seconds and then return
to the point-select screen. Press "NEXT POINT" or "PREVIOUS POINT" to read the next/previous programmed point of that
type. An error message will indicate if there are no further devices of that type programmed.
NOTE: If attempting an operation on a point on an NFS-320, NFS2-640, or NFS2-3030, the NCA-2 will display the error message "INVALID
POINT - SELECTING NEXT POINT" and automatically select the next valid point.
38
40-characters across
NODE LABEL FOR LOC
S Y S T E M N O R M A L
1 0 : 0 1 : 0 1 A T U E J A N 1 5 , 2 0 0 8
This area of the screen can contain
a custom graphic downloaded from VeriFire
Draw your custom "Main Menu" or "See Menu Items"
indicator in the graphic.
Figure 4.2 LCD with Main Menu Selection
NCA-2
A L
®
Tools
M A I N M E N U
Soft Keys
NCA-2 Manual — P/N 52482:M5 03/20/2019
The LCD Display
MAIN MENU
Selection