F.4: Afp-200 - Honeywell NOTIFIER NCA-2 Instruction Manual

AFP-200
System Troubles
There is one FACP System Trouble that displays differently at the NCA-2.
Read Status
Read Status of Special Function Zone 7 on the AFP-300/AFP-400 is not supported.
Disable/Enable
Disable/Enable of zones on an AFP-300/AFP-400 is not supported.
Control ON/OFF
Control ON/OFF on the AFP-300/AFP-400 is not supported.
Shadow Points
Shadow points are not supported on an AFP-300/AFP-400.
MONITOR and CONTROL ACS points can not look at output modules, bell circuits or panel circuits on an AFP-300/AFP-400.
Auto-Acknowledge
A Network Adaptor Module (NAM) connected to an AFP-300/AFP-400 will auto-acknowledge an event on the panel. The panel then
shows the event as acknowledged, and this event can not be acknowledged again at the panel since it has already been acknowledged
locally. The NCA-2 or another display node must be used for acknowledgement.
F.4 AFP-200
The device types for this panel will display on the NCA-2 as follows:
System Troubles
There are two FACP System Troubles that display differently at the NCA-2.
Read Status
Read Status is not supported on the AFP-200.
Disable/Enable
Disable/Enable on an AFP-200 is not supported.
Control ON/OFF
NCA-2 Manual — P/N 52482:M5 03/20/2019
AFP-300/AFP-400
Device Point Type
SILENCE
SYSTEM RESET
EVACUATE
BURGLAR ALA
COMB.MONITOR
Table F.6 NCA-2 Display for AFP-300/AFP-400 Device Point Types
AFP-300/AFP-400
System Trouble
PROG. MODE ENTERED
Table F.7 NCA-2 Display for AFP-300/AFP-400 System Trouble
AFP-200 Device Point
Type
HEAT(ANALOG)
BURGLAR ALA
SUPERVISORY
SILENCE
SYSTEM RESET
EVACUATE
Table F.8 NCA-2 Display for AFP-200 Device Point Types
AFP-200
System Troubles
NO DEVICES INSTALLED
PROG. MODE ENTERED
Table F.9 NCA-2 Display for AFP-200 System Troubles
NCA-2 Displays:
SIL SWITCH
RESET SWITCH
EVACUATE SW
SECURITY L
SMOKE(MULTI)
NCA-2 Displays:
PROG MODE ACTIVATED
Displayed at NCA-2 as
Device Point Type:
HEAT
SECURITY L
TRACK SUPERV
SIL SWITCH
RESET SWITCH
EVACUATE SW
Displayed at NCA-2 as:
NO DEV.INST ON L1
PROG MODE ACTIVATED
UL 8th Edition Panel Applications
97