Delete Programming - Honeywell NOTIFIER NCA-2 Instruction Manual

Delete Programming

5.7 Delete Programming
The following menu allows complete or partial clearing of programming.
Main menu

Program/alter status menu

Delete Programming
CLEAR ALL PROGRAMMING
except passwords. A confirmation screen will display asking the user to confirm the deletion command. Pressing this key causes a
reboot.
CLEAR: PANEL
programming. A confirmation screen will display asking the user to confirm the deletion command. Pressing this key causes a reboot.
CLEAR ACS
- Press to remove all ACS programming from panel memory. A confirmation screen will display asking the user to con-
firm the deletion command. Pressing this key causes a reboot.
NCA-2 Manual — P/N 52482:M5 03/20/2019
C L E A R : P A N E L
Figure 5.50 Delete Programming
- Press to remove all panel and ACS programming information. Pressing this key removes everything
- Press to remove all programmed panel setting information from control panel memory. This does not remove ACS
D E L E T E P R O G R A M M I N G
C L E A R A L L P R O G R A M M I N G
Programming
C L E A R A C S
A C C E P T
B A C K
87