5
. RIM BRAKE: INSTALLATION AND HOUSING ROUTING
5.3
Route the RB housing into the frame top tube, from the exit hole on the rear part of top
tube to the head tube.
Refer to chapter "4. HOUSING AND HOSE LENGTH RECCOMENDATION" for the correct
housing length.
5.4
Apply 40 cm foam sleeve on the RB housing and pull it into the top tube. Make sure to
place the foam sleeve nearby the head tube.
9
CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com
FOAM SLEEVE
03