Front Derailleur Installation - PINARELLO DOGMA F12 Series Assembly Manual

7
. ELECTRONIC GROUPSET (DI2) INSTALLATION AND CABLE ROUTING
7.3

Front Derailleur installation:

- Insert the FD wire grommet into the seat tube exit hole
- Install the front derailleur to the FD hanger. Tighten the bolt until the FD is in place.
It will be fully tightened, following OEM specs, only at the final tuning stage (refer to
chapter "14. FINAL CHECKS" for more details).
- Attach the 350mm wire EW-SD50 to the FD
19
13
CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com
GROMMET
14