PINARELLO DOGMA F12 Series Assembly Manual page 11

5
. RIM BRAKE: INSTALLATION AND HOUSING ROUTING
- Install the upper bearing in its frame seat. Make sure to capture the RB housing between
bearing and steerer tube.
ATTENTION! apply grease around the bearing frame seat.
- Install the compression ring.
ATTENTION:
• the cut on compression ring must be on the backward side.
• the RB housing must be on the right notch in the compression ring.
- Install the head set top cap. Make sure to keep the RB housing on the right notch in the
headset top cap.
In case of Electronic groupset (Di2) go to chapter 7.
In case of Mechanical groupset go to chapter 8.
11
CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com
05
RB