General Notes About Assembly - PINARELLO DOGMA F12 Series Assembly Manual

2

. GENERAL NOTES ABOUT ASSEMBLY

2.1 Before assembly inspect all components (frame, fork, seatpost, handlebar, headset
top cap and spacers) to ensure that there aren't any sharp edges, burrs or cracks.
2.2
In the case of any crack, DO NOT continue assembly and immediately contact the
Pinarello Customer Service.
All edges of the handlebar, stem, top cap and spacers in contact with the steerer tube
2.3
should be rounded out to eliminate stress points.
2.4 Do not drill, remove parts or modify the frame components in any way. Not following
this warning could result in injury or death.
Do not install incompatible components. Use of other components may compromise
2.5
the integrity of the assembly.
4
CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com