PINARELLO DOGMA F12 Series Assembly Manual page 27

9
. INTEGRATED HANDLEBAR (TALON ULTRA) ROUTING (ELECTRONIC DI2)
9.5 Route the electronic cable EW-SD50 connector through the headset top cap and
through the compression ring. Make sure to route the cable through the left notch.
9.6
Route the 1000 mm cable EW-SD 50 through the head set top bearing and down
through the DT until the DT opening for the junction.
9.7 Insert the junction EW-RS910 into the plastic support interface.
- Connect the junction EW-RS910 to the cable EW-SD50 coming from handlebar and
with the cable EW-SD50 coming from the BB.
- Fix the junction EW-RS910 on the DT slot using the upper plastic cover and the M3
screws. Maximum allowed torque: 0.5 Nm.
27
CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com
24