PINARELLO DOGMA F12 Series Assembly Manual page 38

11
. BRAKE CABLE INSTALLATION (INTEGRATED HANDLEBAR)
11.1.7 Install the holed rubber plug into the Talon ULTRA plastic cover.
11.1.8 Run the FB housing and cable through the plastic cover and the holed rubber plug.
11.1.9 Fix the cover to the handlebar with four screws. For the correct tightening torques,
refer to the chart of the chapter "3. TOOLS AND TORQUE SPECS".
11.1.10 Connect the FB housing to the front brake caliper following OEM instructions.
11.1.11 Run the RB and FB cables from shifter levers through the housings and connect them
to the brake calipers following OEM specs.
ATTENTION! The final tuning of the brakes (both FB and RB) will be done only at final
stage (see chapter "14. FINAL CHECKS").
38
CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com
35