TECHNICAL DATA ERROR MESSAGES AND TROUBLESHOOTING BATTERY HAZARDS AND ACCIDENT PREVENTION 9. TRANSPORTING YOUR BIKE 10. AFTER A FALL 11. GENERAL INFORMATION ON THE USE OF THE NYTRO DUST FOR LONG RIDES 12. TECHNICAL SPECIFICATIONS 13. CE DECLARATION OF CONFORMITY...
Pinarello dealers and their irreplaceable professionalism and experience. Before your first outing, familiarise yourself with the Nytro Dust by practicing in a known, safe place. Compared to the average use of a regular muscle-powered bicycle, a pedelec allows you to reach much higher speeds, quickly and quietly.
WARRANTY The Pinarello Nytro Dust bicycle is covered by a legal warranty of two years from the date of purchase, with possible extension of further three years subject to the registration of the bicycle, within 30 days of purchase, on the website at the address: pinarello.com/frame-registration...
3. FIRST RIDE WITH YOUR NYTRO DUST Before riding your Nytro Dust bicycle for the first time, it is a good idea to spend some time with your Pinarello dealer to fine-tune the set-up, so that it meets your specifications and all components operate in the proper working ranges.
Page 9
11. With the support of your trusted Pinarello dealer, check the pressure of the front suspension fork and rear suspension. Incorrect adjustment can lead to defective operation which could damage the fork and shock absorber.
4. BEFORE EVERY RIDE We recommend that before each ride with your Pinarello Nytro Dust, you carry out a series of checks for the proper operation of your bike and for your own safety. Even after a long period of standstill, or during transport, there could be changes to the bike’s performances and settings.
5. GENERAL INFORMATION ON YOUR NYTRO DUST BICYCLE The Pinarello Nytro Dust bicycle is a Pedelec (Pedal Electric Cycle) or EPAC (Electrically Power Assisted Cycle), which is a bicycle equipped with a motor that provides assistance as long as the cyclist is pedalling.
CONNECTION OPTIONS You can connect a PC, smartphone or tablet to the Nytro Dust cyclocomputer to customise the settings for individual components or the entire system, and to update the firmware.
To adjust the pressure and all detailed settings of the rear suspension, we recommend that you rely on your trusted Pinarello dealer, who has the necessary expertise and tools to ensure perfect tuning. You can find more detailed information on the adjustment, use and maintenance of the rear suspension in the manufacturer’s manual.
TIGHTENING TORQUES The maximum permitted tightening torques are marked on the components themselves. Always tighten to the recommended torque. If torque indications are missing or illegible due to wear, refer to the component manufacturers’ manuals or contact your Pinarello dealer.
Refer to the rear shock manufacturer’s manual for maintenance intervals and procedures. In any case, we advise you to refer to your trusted Pinarello dealer to carry out maintenance operations.
INSPECTION AND MAINTENANCE We recommend that you have your trusted Pinarello dealer check the bike periodically. An assembly check should be carried out after the first few kilometres, for purposes of adjustment after the components have settled in. After that, we recommend that the bike be inspected periodically (approximately once a year).
8. USE AND MAINTENANCE OF THE BATTERY AND BATTERY CHARGER This section provides the main instructions on the use of the battery. For more detailed and specific information please refer to the manual provided by the manufacturer of the pedal assist system. CHARGING AND USE OF THE BATTERY You cannot use the battery immediately after purchase.
9. TRANSPORTING YOUR BIKE The Pinarello Nytro Dust can be transported like any regular bicycle on the appropriate vehicle bike carriers, or inside the vehicle itself. Whatever the transport method, make sure that the bike is properly secured and periodically checked during transport. When transporting the bike, especially outside the vehicle, always dismount the battery to prevent damage.
Check that the battery is still properly seated and free of visible damage. If there is visible damage, do not use the pedal assist. A damaged battery could short-circuit, or water and humidity could enter it, or it could ignite or explode. If the battery is damaged, contact your Pinarello dealer immediately.
11. GENERAL INFORMATION ON THE USE OF THE NYTRO DUST The Nytro Dust bicycle can be used as a regular muscle-powered mountain bike by simply turning off the motor. The behaviour without assist will be similar to what happens with a low battery charge.
Page 25
Use appropriate clothing for your bicycle to prevent injuries to you and others. Always use extreme caution when riding your Nytro Dust. Although the full suspension gives you maximum grip and rideability, jumps and high speeds over rough terrain can lead to your bicycle breaking down, resulting in safety...
FORK: Rockshox Lyrik Ultimate / Rockshox 35 Silver TK The Pinarello Nytro Dust is equipped with a front fork by RockShox, a leader in the E-MTB sector. The Nytro Dust 3.0 is assembled with a RockShox Lyrik Ultimate fork for 29” wheel, with 150 mm travel.
The Cicli Pinarello srl company, with legal and operating headquarters in Viale della Repubblica 12, Villorba (Treviso), Italy, in the person of Fausto Pinarello, Chairman of the Board of Directors, as legal representative expressly delegated for this purpose and under his responsibility,...
Need help?
Do you have a question about the Nytro Dust and is the answer not in the manual?
Questions and answers