Stem And Bar Installation And Routing (Four Configurations) - PINARELLO DOGMA F12 Series Assembly Manual

13
. STEM AND BAR INSTALLATION
AND ROUTING (FOUR CONFIGURATIONS)
13.1 The Dogma F12 and F12 Disk can be assembled also with the MOST TIGER stems and
traditional bars. To allow the cables route into the frame a Top Cap Adapter is needed.
13.2 In order to perform the correct assembly of the bike with the stem and bar, you can
follow the steps of the previous chapters with consideration for in this case there is the
adapter between the stem and the spacers (and the top cap).
Hence, positioning the stem (and bar) as already illustrated at paragraph 9.4 or 10.3;
be careful to place in contact the handlebar and the adapter, and then the X + 2 cm
dimension now needs to be considered from the lower planar surface of the adapter
and upper planar surface of the top cap. Where X is total height of the spacers you are
going to install.
48
[where X is the total height of the spacers]
CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com
45
X + 2 cm